Shearing

This study delves into the application of machine learning (ML), specifically a Gradient Boosting (GB) model, for predicting the punching shear strength (PSS) of two-way reinforced concrete flat slabs.

16p viengfa 28-10-2024 2 1   Download

The nonlinear dynamic buckling responses of functionally graded graphene platelet reinforced composite (FG-GPLRC) cylindrical and sinusoid panels with porous core are presented in this paper. The governing formulations are established by applying the nonlinear higher-order shear deformation theory (HSDT).

10p viengfa 28-10-2024 1 1   Download

Bài viết trình bày việc tìm hiểu vai trò của siêu âm đàn hồi Shear wave đánh giá mức độ xơ hóa gan. Đối tượng và phương pháp: nghiên cứu tiến cứu, mô tả cắt ngang trên 112 bệnh nhân viêm gan mạn, thực hiện siêu âm Fibroscan, kết hợp siêu âm đàn hồi SWE trên máy siêu âm LogiqS8, đánh giá độ xơ hóa gan theo Metavir (F0 - F4).

6p viengfa 28-10-2024 1 1   Download

In the present paper, by using the higher-order shear deformation theory and the strain-displacement relationships of large deflection, the postbuckling analysis of the functionally graded graphene-reinforced composite laminated (FG-GRCL) parabola, sinusoidal, and cylindrical externally pressured panels is presented in detail.

10p viengfa 28-10-2024 2 1   Download

Asphalt concrete pavement often appears damaged such as rutting, fatigue crack, potholes, etc. at high air temperature, heavy rain in long time, or at locations with high traffic, large horizontal force, and poor-quality construction sites. T This paper presents an evaluation of shear bond strength of double-layer asphalt samples fabricated by shear test device with normal pressure.

8p viengfa 28-10-2024 2 1   Download

In this study, we propose a machine learning technique for estimating the shear strength of CRC beams across a range of service periods. To do this, we gathered 158 CRC beam shear tests and used Artificial Neural Network (ANN) to create a forecast model for the considered output.

12p viengfa 28-10-2024 2 1   Download

This study underscores the critical importance of integrating engineering and geological assessments at various stages of dam construction. Re-evaluating and addressing evolving foundation conditions, particularly during construction, is essential for applying effective treatments to prevent dam failure during operation.

15p viengfa 28-10-2024 2 1   Download

The linear buckling behavior of functionally graded cylindrical shells with porous core stiffened by spiral stiffeners under axial compression using the first-order shear deformation theory is presented in this paper.

9p viengfa 28-10-2024 1 1   Download

The present work deal with the propagation of a horizontally polarised shear (SH) wave in an infinitely long cylindrical structure comprised of three concentric isotropic layered media. The model has been formulated in cylindrical co-ordinates and an analytical approach is employed to achieve the closed form of the dispersion equation.

3p vibecca 01-10-2024 1 1   Download

This paper presents a numerical modeling of RC shear walls using SSI3D finite element program. The objective of this research is to develop the full-scale model lab test of reinforced concrete (RC) shear wall. The wall is subjected to axially and laterally monotonic loading up to failure.

4p vibecca 01-10-2024 1 0   Download

This research employs a novel third-order shear deformation theory to investigate the static buckling and static bending behaviors of organic nanoplates, marking the first instance of such an approach being used. The formulas are computed using strain gradient theory to consider the impact of the size effect, where this size effect parameter is considered in both positive and negative cases.

15p vibecca 01-10-2024 2 0   Download

Recently, the application of textile-reinforced concrete (TRC) in thin-walled precast structures has gained significant attention. Among these innovations, the combination of TRC and reinforced concrete (RC) has emerged as an effective method for creating hybrid structural systems. This paper presents the experimental results analyzing the shear behavior of a hybrid deck slab structure consisting of TRC stay-in-place (SiP) formwork and RC components.

10p vibecca 01-10-2024 3 0   Download

A truss model supplementing the concrete contribution is introduced in this paper to predict the shear strength of concrete beams reinforced with various types of FRP bars. The contributions from truss and direct strut mechanisms are considered in the analytical model. The truss model which has struts at various angles considering concrete contribution is derived in this paper.

13p vibecca 01-10-2024 1 0   Download

In this study, a series of Consolidated–Undrained triaxial compression tests were conducted at a constant axial strain rate, with a small unloading and reloading during the monotonic loading to investigate the effect of various densities and curing times on the mechanical properties of Liquefied Stabilized Soil (LSS).

6p vibecca 01-10-2024 0 0   Download

In this research, the smoothed finite element methods (S-FEM) based on the edge-based (ES) and node-based (NS) approaches are combined to develop for the 3-node triangular plate element which uses the mixed interpolation of tensorial components (MITC3) technique to remove the shear-locking phenomenon.

13p viyoko 01-10-2024 4 1   Download

This paper presents the free vibration and critical buckling analyses of porous plates based on the first-order shear deformation theory by the proposed three-node triangular element. The bending strain fields of the suggested element are enriched by the bubble node located at the centroid of the triangular element.

18p viyoko 01-10-2024 2 1   Download

This study introduces a novel Ritz approximation function to analyze the free vibrations of laminated composite shallow curved beams. The methodology utilizes polynomial functions-based Fibonacci series to develop the Ritz’s approximation function. The displacement field aligns with the high-order shear deformation theory designed explicitly for shallow curved beams.

18p viyoko 01-10-2024 5 1   Download

The main aim of this work is to use a finite element method (FEM) based on Shi’s third-order shear deformation plate theory (TSDT) to study the dynamic response of sandwich plates subjected to consecutive blast loading. The sandwich plate has an auxetic honeycomb core and two different functionally graded materials (FGMs) skin layers (so-called h-FGS plates).

14p viyoko 01-10-2024 2 1   Download

This article studied precast concrete revetments with ALB composite material reinforcement and conducted experimental research to determine the shear resistance characteristics of coral sand and the friction characteristics of concrete materials with coral sand.

13p viyoko 01-10-2024 4 1   Download

In this article, the first-order shear deformation theory (FSDT) and Navier’s solution are used to establish analytical solutions for analyzing the deflection and stresses of FGM sandwich plate structures resting on a Pasternak elastic foundation.

15p viyoko 01-10-2024 3 1   Download