Summary of the thesis of engineering

This research has foundations in collaboration; the collaboration of ideas, agreement on requirements and harnessing of benefits. This is fitting for a research subject since research shares the same virtues. In this section a summary of the research will be provided. The summary will briefly explain the origins of the research, how the research was proposed. It will then provide a synopsis of the research methodology and application. The qualitative research case studies will be explained and the quantitative research discussed.

179p runthenight07 01-03-2023 10 3   Download

The aim of this project is to provide a summary of the current knowledge on energy recovery options from wastewater treatment plants sludge and/or biosolids. This covers technologies as well as data from case studies and research experimental results. The focus of the study is the ATP. The project methodology comprised two stages. The first stage involved a review of the current literature.

166p runthenight07 01-03-2023 7 3   Download

The study of technical solutions to improve the quality of the radar receiver through research to improve the quality of some modules in receiver in order to enhance sensitivity, reduce the phase noise, enhance stability and improve quality receiver signal of radar.

27p guitaracoustic02 08-12-2021 18 3   Download

In this thesis, we propose a mathematical model to improve the hull form of a container ship in the preliminary design stage, aiming to reduce the ship's resistance concerning constraints of Vietnam's river-sea route.

39p closefriend09 16-11-2021 22 3   Download

Studying, analyzing and evaluating the basic factors affecting the wear resistance of the shear cutting drum, such as coal strength, the geometry of the cutting teeth, materials of cutting teeth, the cutting angle. Cutting depth, cutting feed and cutting speed are the basis for selecting the appropriate factors in fabrication, using the cutting teeth of the shearer.

27p closefriend09 16-11-2021 20 2   Download

The influence of some structural factors and utilisation conditions on traction-gripping capacity and stability is determinated to improve working effeficiency of the rubber-tired agrimotor system assembled with a twogang disc plow working on steep terrain.

27p gaocaolon12 18-06-2021 24 4   Download

Study objectives: Determine the static buckling of the three-phase composite plates under the impact of mechanical loads. Determine the dynamic buckling of three-phase composite panel under the impact of hydrodynamic load.

25p tunelove 11-06-2021 29 3   Download

Purpose research: Research theoretical basis and practical basis of teaching technical skills (TTS) towards developing collaborative working skills (CWS) for pedagogical students; thereby proposing measures to teach the practicetechnical towards developing CWS for pedagogical students, in order to improving the quality of teaching in colleges and universities of education with technical training in this time.

28p tunelove 10-06-2021 10 3   Download

The purpose of the topic Researching and building models of regional-linked hydropower turbine speed control system. Research on building regional-linked hydroelectric turbine speed control system on the basis of fuzzy logic and artificial neural networks to improve control quality.

27p hobbsandshaw 09-06-2021 32 5   Download

Research aims: The research aims at researching and developing theoretical and practical basis for control theory-based teaching. On that basis, the research builds up the process of control theory-based teaching and apply it to teaching PLC modules for engineering majored college students.

27p thebadguys 08-06-2021 25 4   Download

Objectives of the thesis: The objective of this study is to develop an energy and nutrients recovering wastewater treatment process combining physicochemical and biological methods for NRP wastewater.

26p extraenglish 24-05-2021 24 3   Download

Thesis objectives and tasks: Develop a strategy for the DSM program to operate the PVG and WG exploitation system in EPS Vietnam; develop the concept maps to meet the requirements of the DSM program.

27p extraenglish 24-05-2021 23 4   Download

Research Objective: Research and propose a novel adaptive trajectory tracking algorithm for FWOMR ‘s nonlinear uncertain model which is influenced by the change of robot parameters and the effect of noise when operating on another plane. Construct the physical model of FWOMR and the controller based on the microchip and embedded programming technique to experiment with the proposed algorithms.

27p extraenglish 24-05-2021 25 7   Download

The research objectives of the thesis: Research to isolate, determine chemical structure and probe the biological activity of chemical components in apple and Docynia indica fruits; Research to optimize the extraction technology process to create products from Docynia indica fruits

27p extraenglish 24-05-2021 27 4   Download

The research goals of the thesis: Preparation and characterization of activated carbon products denaturated by surface oxidation technics. Determination of cation exchange capacity of the materials. Investigation of Mn and Fe linking on surface of prepared materials to form a new adsorption material for effective removing hazard anions in water environment.

26p extraenglish 24-05-2021 27 2   Download

Aim of the thesis: Development of a new method for determining concentration of the radionuclides in enviromental samples by mean of gamma spectroscopy. Establishing a data set of the soil-plant transfer factor (TF) of radionuclides 238U, 232Th and 40K for some vegetables in Truong Sa island and that of 238U, 232Th, 40K and 137Cs for tea tree from Luong My farm, Hoa Binh province, Vietnam and evaluate the influence of natural radionuclide concentration to the soil-plant transfer process of artificial radionuclide 137Cs.

30p extraenglish 24-05-2021 24 3   Download

The research objectives of the thesi: Manufacturing biochar (BC) and activated carbon from coffee husk; Fabrication of biochar/activated carbon composite materials from coffee husk and MnFe2O4 nanomaterials to treat Cr(VI) and Ni(II) ions in water. Clarifying adsorption mechanism and heavy metal ion adsorption model on VLHP from coffee husk.

26p extraenglish 24-05-2021 19 3   Download

The purpose of the thesis is to develop the novel and more effective strategies to furnish fluorine containing compounds employing readily, inexpensive and effective methods under heterogeneous transition metal catalysts.

29p extraenglish 26-05-2021 8 3   Download

Objective: This dissertation explores the influence of pectoral fin structures at different swimming modes on a robotic fish's locomotion behavior; Some objectives are addressed to achieve the mentioned aim as follows: Firstly, new designs based on bio-inspired pectoral fin types are constructed. Secondly, to describe fin deformation and body part movement, novel dynamically mathematical models are developed.

28p extraenglish 26-05-2021 26 5   Download

The purpose of the dissertation is to test and use different accuracy assessment methods to evaluate the improvement of grid DEMs accuracy when increasing resolution by popular resampling methods. Currently and building the algorithm and programs to increase the spatial resolution and accuracy of the grid DEM using Hopfield neural networks. Objects of the study are grid DEMs which are built from different methods such as: LiDar DEM, contour and field measurements. The scope of the study includes the spatial resolution and accuracy of the above grid DEMs.

25p dolphintaletale 23-04-2021 32 6   Download