Thermal gravimetric analysis
-
In the present work, a modified b-nickel hydroxide (b-Ni(OH)2) electrode material with CuO has been prepared using a co-precipitation method. The structure and property of the modified b-Ni(OH)2 with CuO were characterized by X-ray diffraction (XRD), Fourier Transform infra-red (FT-IR), Raman and thermal gravimetric-differential thermal analysis (TG-DTA) techniques.
6p viberbers 09-08-2023 5 4 Download
-
In this paper, some new polythiophenes containing benzo[d]thiazole heterocycle were synthesized by oxidative polymerization in chloroform using iron(III) chloride as a catalytic oxidant.
8p viberkshire 09-08-2023 5 3 Download
-
The objectives of this research work are: Study the clay intercalation by organic dye and develop a process to produce nanoclay-dye pigment with better stability and good performance; Conduct structural characterization to verify the level of intercalation and stability of clay-dye pigment by using X-Ray diffraction (XRD) and Transmission Electron Microscopy (TEM); Investigate the thermal stability of clay dye pigment using Thermo Gravimetric Analysis (TGA) to reveal the effect of dye intercalation into the clay on improving thermal stability of organic dye; Compound the clay- pigment with ...
141p runthenight07 01-03-2023 2 2 Download
-
Similar to thermal analysis measurements such as differential scanning calorimetry (DSC), thermo-gravimetric analysis (TGA) and thermo-mechanical analysis (TMA), dynamic mechanical thermal analysis (DMTA) is also a technique that provided information on the thermo-mechanical properties of polymeric materials.
12p vidudley 20-02-2023 3 2 Download
-
PAn (polyaniline) and PAn/ZnO photocatalysts were synthesized using chemical polymerization of aniline. The structure characterization of the synthesized samples was analysed by using X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and UV-Vis spectroscopy measurements, and thermal gravimetric analysis (TGA). The photocatalytic activities of PAn and PAn/ZnO (0.
16p tudichquannguyet 29-11-2021 12 1 Download
-
In this report, we report a green, rapid and scalable synthetic route for the production of reduced graphene oxide (rGO) using an environment-friendly reducing agent (L-glutathione/L-Glu) to test its feasibility for CO & NO2 gas sensing.
10p tamynhan4 06-09-2020 17 1 Download
-
A new approach has been developed for the preparation of mixed-mode stationary phases to separate proteins. The pore surface of monolithic poly(glycidyl methacrylate-co-ethylene dimethacrylate) capillary columns was functionalized with thiols and coated with gold nanoparticles. The final mixed mode surface chemistry was formed by attaching, in a single step, alkanethiols, mercaptoalkanoic acids, and their mixtures on the free surface of attached gold nanoparticles. Use of these mixtures allowed fine tuning of the hydrophobic/hydrophilic balance.
8p trinhthamhodang1 16-11-2019 13 1 Download
-
In this study, the alkaline solutions (NaOH) with concentrations from 1M to 18M, red mud (RM) and silica fume (SF) were used as reactors in geopolymer reactions. RM contains 7.40% SiO2 and 13.65% Al2 O3 and SF has 94.50% SiO2 , but only the active oxides can participate in the geopolymer reactions. The activity of the oxides was investigated by determining the compressive strength of the samples under different curing conditions.
8p caygaocaolon1 13-11-2019 18 2 Download
-
The production of natural latex is limited, and the related demand for terrestrial transportation has increased. The synthesis of rubber has become necessary and the resulting synthetics’ properties must be known. Thermooxidative degradation of synthetic rubbers 1,4- and 1,2-polybutadienes caused by heating the compounds at 100°C in the air, was monitored. The volatile compounds released during the degradation were identified using coupled modern physical methods, including NMR, TGA, MS, FTIR, etc.. Thermal gravimetric analysis showed that oxidation occurred for both 1,4 and 1,2-PB.
7p caygaocaolon1 13-11-2019 12 0 Download
-
The high temperatures of fires affect the physical and chemical properties of the concrete and thus influence its mechanical properties. This paper presents the results of an experimental investigation on the compressive strength at high temperatures of high-strength fibre concretes. The influence of the high temperatures on the physical and chemical changes of the concrete was also analysed by Thermo Gravimetric Analysis/Differential Thermal Analysis (TGA/DTA), X-Ray Diffraction (XRD) and Scanning Electron Microscopy with Energy Dispersive Spectrometry (SEM/EDS).
20p christian2605 10-10-2019 19 1 Download
-
The mechanical properties of eucalyptus wood flours (EWF) filled recycled high density polyethylene (HDPE) composites were investigated. First thermal gravimetric analysis (TGA) and differential scanning calorimetry (DSC) analysis were conducted for recycled HDPE and EWF.
10p masterbarista 15-01-2019 17 0 Download
-
Introduction to Thermal Analysis Methods analysis refers to a variety of techniques in which physical property of a sample is continuously measured as a function of temperature, whist the sample is subjected to a pre determined temperature profile.
32p myphuongblu 04-08-2016 47 5 Download
-
Porous hydroxyapatite ceramic was synthesized by solid phase method using Ca(OH)2 and Ca3(PO4)2 at the temperature interval 200 - 350o C. The samples, after pelleting and sintering, were characterized by X-ray diffractometry (XRD), Fourier transform infra-red spectroscopy (FTIR), scanning electron microscopy (SEM) and thermal gravimetric analysis (TGA). Porous structure of hydroxyapatite was obtained with the 42 – 55% porosity.
5p uocvong01 24-09-2015 110 17 Download