intTypePromotion=1
zunia.vn Tuyển sinh 2024 dành cho Gen-Z zunia.vn zunia.vn
ADSENSE

Lecture CCNA Exploration 4.0 (Kỳ 2) - Chapter 11: OSPF

Chia sẻ: You Can | Ngày: | Loại File: PDF | Số trang:99

66
lượt xem
6
download
 
  Download Vui lòng tải xuống để xem tài liệu đầy đủ

After completing this chapter, students will be able to: Describe the background and basic features of OSPF; identify and apply the basic OSPF configuration commands; describe, modify and calculate the metric used by OSPF; describe the Designated Router/Backup Designated Router (DR/BDR) election process in multiaccess networks; describe the uses of additional configuration commands in OSPF.

Chủ đề:
Lưu

Nội dung Text: Lecture CCNA Exploration 4.0 (Kỳ 2) - Chapter 11: OSPF

  1. Chapter 11: OSPF CCNA Exploration version 4.0 1
  2. Objectives • Describe the background and basic features of OSPF • Identify and apply the basic OSPF configuration commands • Describe, modify and calculate the metric used by OSPF • Describe the Designated Router/Backup Designated Router (DR/BDR) election process in multiaccess networks • Describe the uses of additional configuration commands in OSPF Học viện mạng Bách Khoa - Website: www.bkacad.com 2
  3. Introduction Học viện mạng Bách Khoa - Website: www.bkacad.com 3
  4. Introduction to OSPF Học viện mạng Bách Khoa - Website: www.bkacad.com 4
  5. Background of OSPF Background of OSPF • Began in 1987 • 1989 OSPFv1 released in RFC 1131 This version was experimental & never deployed • 1991 OSPFv2 released in RFC 1247 • 1998 OSPFv2 updated in RFC 2328 • 1999 OSPFv3 published in RFC 2740 Học viện mạng Bách Khoa - Website: www.bkacad.com 5
  6. Single Area OSPF Concepts: OSPF terminology Học viện mạng Bách Khoa - Website: www.bkacad.com 6
  7. Single Area OSPF Concepts: OSPF terminology Học viện mạng Bách Khoa - Website: www.bkacad.com 7
  8. OSPF area Học viện mạng Bách Khoa - Website: www.bkacad.com 8
  9. OSPF Message Encapsulation Học viện mạng Bách Khoa - Website: www.bkacad.com 9
  10. OSPF Packet Types Học viện mạng Bách Khoa - Website: www.bkacad.com 10
  11. Hello Protocol Học viện mạng Bách Khoa - Website: www.bkacad.com 11
  12. Hello Protocol 1. Discover OSPF neighbors and establish neighbor adjacencies. 2. Advertise parameters on which two routers must agree to become neighbors. 3. Elect the Designated Router (DR) and Backup Designated Router (BDR) on multiaccess networks like Ethernet and Frame Relay. Học viện mạng Bách Khoa - Website: www.bkacad.com 12
  13. Hello Protocol • OSPF Hello Intervals – Usually multicast (224.0.0.5) – Sent every 30 seconds for NBMA segments – Sent every 10 seconds for Multi access network • OSPF Dead Intervals – This is the time that must be expired before the neighbor is considered down – Default time is 4 times the hello interval Học viện mạng Bách Khoa - Website: www.bkacad.com 13
  14. Hello Protocol Học viện mạng Bách Khoa - Website: www.bkacad.com 14
  15. Hello Protocol • Electing a DR and BDR –Designated Router (DR): DR is responsible for updating all other OSPF routers (called DROthers) –Backup Designated Router (BDR): This router takes over DR’s responsibilities if DR fails Học viện mạng Bách Khoa - Website: www.bkacad.com 15
  16. OSPF Link-state Updates • Purpose of a Link State Update (LSU): –Used to deliver link state advertisements • Purpose of a Link State Advertisement (LSA) –Contains information about neighbors & path costs Học viện mạng Bách Khoa - Website: www.bkacad.com 16
  17. OSPF Link-state Updates Học viện mạng Bách Khoa - Website: www.bkacad.com 17
  18. Extra: How routing information is maintained when a failure is occurs Network 1 is down LSAs LSAs LSAs Area x 1. When a failure occurs in the network, such as a neighbor becomes unreachable 2. Link-state protocols flood LSAs using a special multicast address throughout an area. 3. Each link-state router takes a copy of the LSA, updates its link-state/topological database. 4. The link-state router will then forward the LSA to all neighboring devices. 5. LSAs cause every router within the area to recalculate routes. Because LSAs need to be flooded throughout an area Note: all routers within that area need to recalculate their routing tables ==> the number of link-state routers that can be in an area should be limited Học viện mạng Bách Khoa - Website: www.bkacad.com 18
  19. OSPF Algorithm Học viện mạng Bách Khoa - Website: www.bkacad.com 19
  20. Administrative Distance Học viện mạng Bách Khoa - Website: www.bkacad.com 20
ADSENSE

CÓ THỂ BẠN MUỐN DOWNLOAD

 

Đồng bộ tài khoản
2=>2