Buckling load

The nonlinear buckling behavior of functionally graded graphene platelet reinforced composite (FG-GPLRC) cylindrical shells reinforced by ring, stringer and/or spiral FG-GPLRC stiffeners under torsional loads is studied by an analytical approach.

10p viengfa 28-10-2024 2 1   Download

The present study thus develop a numerical solution in ABAQUS software to investigate the inelastic buckling moment resistances of rolled steel beams with compact sections and subjected to the effects of residual stresses and initial imperfections.

15p vibecca 01-10-2024 2 0   Download

The present study is going to fill in the gap by performing a review on the typical standard equations for the moment modification factors of simply supported beams and fixed beams subjected to an arbitrary point load. Also, a detail comparison between the equations will be discussed and key warnings will be made.

10p vibecca 01-10-2024 0 0   Download

This paper presents the free vibration and critical buckling analyses of porous plates based on the first-order shear deformation theory by the proposed three-node triangular element. The bending strain fields of the suggested element are enriched by the bubble node located at the centroid of the triangular element.

18p viyoko 01-10-2024 2 1   Download

This paper aims at investigating the optimum location of a single longitudinal stiffener having various crosssection types of steel plate girders subjected to bending loading. The optimum location is found using a gradient-based Interior-Point (IP) optimization algorithm.

11p vifaye 20-09-2024 1 1   Download

Objectives of the thesis: The literature review on the behaviours of composite beams shows that Ritz method is efficient to analyse the behaviours of composite beams with various boundary conditions, however, the number of researches used this method is still limited.

203p monsterhunterer 20-06-2021 8 2   Download

Study objectives: Determine the static buckling of the three-phase composite plates under the impact of mechanical loads. Determine the dynamic buckling of three-phase composite panel under the impact of hydrodynamic load.

25p tunelove 11-06-2021 29 3   Download

The object of this thesis is to propose some beam models for static, buckling and vibration analysis of functionally graded isotropic and sandwich beams embedded in hygro-thermo-mechanical environments.

216p capheviahe28 01-03-2021 25 3   Download

This paper proposes an optimization procedure for maximization of the biaxial buckling load of laminated composite plates using the gradient-based interior-point optimization algorithm. The fiber orientation angle and the thickness of each lamina are considered as continuous design variables of the problem.

12p tamynhan6 14-09-2020 13 1   Download

This study has investi-gated the hollows considering the variable of its profile size, length and thickness. The boundary condition used the free-fixed configuration to convince the critical loads occurred from axial compression.

10p lucastanguyen 01-06-2020 10 3   Download

In this paper, buckling behavior of aluminum cylindrical shell with rectangular cutout, subjected to axial pressure was studied by means of finite element simulations. The effects of geometric parameters (R, t, a, b and L) on the first buckling mode capacity of the shell were studied.

12p tohitohi 19-05-2020 11 1   Download

This paper deals with the elastica and buckling loads of the nonlinear elastic tapered cantilever columns subjected to an axial load at the free end. The column cross section is rectangular, where the width and depth vary linearly with the column axis.

12p tohitohi 19-05-2020 11 1   Download