Chemical synthesis

In the present work, CeO2 with different loading was embedded on reduced graphene oxide (rGO) by a simple one-pot hydrothermal method. The synthesized samples were characterized using XRD, EDX mapping, FESEM, and UV-Vis DRS techniques.

11p vifilm 11-10-2024 2 0   Download

Zeolite, as chemical essence, is an aluminosilicate mineral synthesized by richsilica source, such as rice husk ash (RHA). This study focuses on the synthesis of zeolite NaP1 under a facial hydrothermal method using the silica source utilized from RHA without any-pretreatment steps.

6p vikwong 29-09-2024 2 1   Download

Manufactured dyes are notably troublesome chemical toxins. The industrial wastes of these dyes are exceedingly noxious to aerobic and aquatic life and can cause compounds that show carcinogenic, mutagenic, and neurotoxic effects. In this study, cadmium imidazolate frameworks were synthesized by a solvothermal method from cadmium acetate and 2-methylimidazole in an ethanol/methanol mixture.

7p vikwong 29-09-2024 3 1   Download

TiO2 thin films were synthesized by using Chemical Vapor Deposition (CVD) method on different substrates, such as glass, aluminium foil , and ceramic. The samples had been characterized by microscopy analysis, SEM, and EDS. The results show that TiO2 thin films were successfully fabricated and TiO2 nanocrystals with size of 50-100 nm loaded uniformly on surface of different substrates.

6p vikwong 29-09-2024 3 1   Download

Alginate-stabilized Cu2O@Cu nanoparticles were fabricated by chemical reduction method using nature polymer alginate as a stabilizing agent. Transmission electron microscopy (TEM), X-ray powder diffraction (XRD), infrared (FT-IR) spectrum, and UV-Vis analysis were used to investigate the morphology, size, structure, and stability of the nanoparticles synthesized.

6p vikwong 29-09-2024 5 1   Download

The green production of hydrogen peroxide has attracted considerable attention owing to the urge for an alternative production method to the current production. Electrocatalytic reduction via the 2e- pathway has emerged as the brightest approach.

6p vikwong 29-09-2024 3 2   Download

Zeolite seed-based mesoporous aluminosilicate material MSU-S is normally synthesized from pure chemicals. In the study, MSU-S material was synthesized using natural resources such as rice husk, and kaolin in Vietnam. Here, a systematic investigation is conducted to find the relationship between the synthesis conditions (aging time, hydrothermal time, hydrothermal temperature, pH environment) and the formation of mesoporous structure, as well as the material properties.

6p vikwong 29-09-2024 6 1   Download

This study aims to investigate the effectiveness of the green microwave technique in producing 1T/2H-MoS2 nanomaterials using polyol solvents. The paper presents a thorough analysis of the structural and property characteristics of the synthesized materials and elucidates the underlying chemical mechanism that governs the formation of hybrid-phase nanostructures. Additionally, the role of polyol solvents in the practical synthesis of nano MoS2 under microwave heating is evaluated and explained.

15p xuanphongdacy06 18-09-2024 1 1   Download

This work demonstrates an AlGaN/GaN high electron mobility transistor (HEMT) with Cr/Graphene ohmic contacts constructed without heat treatment. The Cr/Graphene ohmic contact was fabricated using a spray-coated graphene nanoflakes solution and electron-beamevaporated Cr. This method does not require a high-temperature annealing step in conventional Ti/Al/Ni/Au ohmic contact. It is suggested that the Cr/graphene combination acts similarly to a doped n-type semiconductor in contact with AlGaN/GaN heterostructures, enabling carrier transport to the AlGaN layer.

8p xuanphongdacy06 18-09-2024 3 1   Download

In this study, Zinc oxide (ZnO) nanoparticles with a size of about 50 - 70 nm were green-synthesized using tea leaves and ZnO/Polypyrrole (ZnO/Ppy) nanocomposites were obtained by ultrasonic-assisted chemical polymerization method using pyrrole monomer and the nanoparticles. The characterization of the materials is conducted using several analytical techniques, including Field Emission Scanning Electron Microscopy (FESEM) and X-Ray Diffraction (XRD) and Ultraviolet visible spectrum (UV-Vis).

11p xuanphongdacy06 18-09-2024 2 1   Download

CuO nanoparticles were synthesized by alcohol-assisted hydrothermal method at various pH values, using sodium hydroxide as a precursor for pH control. The chemical composition, morphological and structural properties of the obtained CuO nanoparticles were investigated by the Raman and energy-dispersive X-ray spectroscopies, the field-emission scanning electron microscopy, and the X-ray diffraction.

12p dianmotminh02 03-05-2024 3 1   Download

This article, we present a thorough and straightforward hydrothermal method towards the production of reduced graphene oxide templated MIL-53(Fe) hybrids RGO@MIL-53(Fe). The structural characteristics of created hybrids were identified by using BET, FESEM, powder X-ray diffraction, and FTIR techniques. Methylene blue (MB) dye (a model water pollutant) was used to evaluate H2O2-assisted photo-catalytic efficiency of RGO@MIL-53(Fe).

9p dianmotminh02 03-05-2024 4 2   Download

In the present study, we have follwed the hydrothermal path for the synthesis of gold nanoparticles (Au NPs) from the biomaterial Elaeocarpus ganitrus seeds extract, which is a rapid, eco-friendly, non-chemical way. The prepared NPs were thoroughly analysed by powder x-ray diffraction and high resolution transmission electron microscopy studies and were also tested for anticancer studies.

7p meyerowitz 25-12-2021 25 1   Download

The characteristics of synthesized nanoparticles depend on the source of the plant extracts because of different combinations and concentrations of organic reducing agents present in the extracts (Mukunthan and Balaji, 2012).

178p spiritedaway36 26-11-2021 10 2   Download

The purpose of the thesis is to synthesize the effective catalysts based on Pt/SBA-15 modifed with Al and/or B and their applicability in n-heptane hydroisomerization, tetralin hydrogenation and paracetamol detection.

129p closefriend04 17-10-2021 16 4   Download

The purpose of this thesis is to study and synthesize BiMO materials (M = V,Ti,Sn) by microwaveassisted chemical method, hydrothermal method, sol-gel method and evaluate their physical properties. The synthesized materials (Bi2Sn2O7 and Bi2Ti2O7) were investigated the photocatalytic activity in the decomposition of RhotaminB (RhB) under visible light.

28p thebadguys 08-06-2021 23 3   Download

Objectives of the dissertation: Research and synthesize and determine the hybrid compound structure containing Quinazoline frame. Research on carcinogenic activity and inhibition of acetylcholinesterase enzyme of synthetic compounds..

26p extraenglish 24-05-2021 21 3   Download

Synthesis and structural analysis of hydrotalcite bearing benzothiazolylthiosuccinic acid modified by silane; study on corrosion inhibiting ability for steel of hydrotalcite bearing benzothiazolylthiosuccinic acid modified by silane.

31p capheviahe27 23-02-2021 33 7   Download

The aims of the dissertation are: Isolation and purification of the main chemical constituents of the plant Centella asiatica (L.) Urban collected from various regions in Vietnam; synthesis of new derivatives of asiatic acid and madecassic acid obtained from C. asiatica.

27p capheviahe27 23-02-2021 34 3   Download

5-(4-Bromophenyloxymethyl)-1,3,4-oxadiazol-2-thiole (3a) and 5-(4 -methylphenyloxymethyl)-1,3,4-oxadiazol-2-thiole (3b) were synthesized starting from 4-bromophenol and 4-methylphenol (p-crezol), respectively. The 5-aryl- -oxymethyl-1,3,4-oxadiazole-2-thiole (3a, b) were treated with N-aryl-2-chloro- -acetamides to give six corresponding new N-aryl-[(5-aryloxymethyl-1,3,4- -oxadiazol-2-yl)sulfanyl]acetamides (4a1-3, 4b1-3).

7p tamynhan5 10-12-2020 7 2   Download