Field electron emission

n this work, pectin was extracted from pomelo peel while rice husk ash was used for silica recovery. The obtained CPS were characterized by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), and Field emission scanning electron microscopy (FE-SEM).

8p viengfa 28-10-2024 2 0   Download

In this study, Zinc oxide (ZnO) nanoparticles with a size of about 50 - 70 nm were green-synthesized using tea leaves and ZnO/Polypyrrole (ZnO/Ppy) nanocomposites were obtained by ultrasonic-assisted chemical polymerization method using pyrrole monomer and the nanoparticles. The characterization of the materials is conducted using several analytical techniques, including Field Emission Scanning Electron Microscopy (FESEM) and X-Ray Diffraction (XRD) and Ultraviolet visible spectrum (UV-Vis).

11p xuanphongdacy06 18-09-2024 2 1   Download

CuO nanoparticles were synthesized by alcohol-assisted hydrothermal method at various pH values, using sodium hydroxide as a precursor for pH control. The chemical composition, morphological and structural properties of the obtained CuO nanoparticles were investigated by the Raman and energy-dispersive X-ray spectroscopies, the field-emission scanning electron microscopy, and the X-ray diffraction.

12p dianmotminh02 03-05-2024 3 1   Download

Nano-hydroxyapatite/starch composite was synthesized using in situ precipitation. Starch concentration effect on the structure of composite was examined. Characterization of the obtained samples, The X-ray diffraction and Fourier transform infrared spectroscopy demonstrated the purity of the formed nano-HA in the starch matrix. Morphology studies of the samples, checked by field emission scanning electron microscope and transmission electron microscope, show the effects of starch on the size, shape, and morphology of hydroxyapatite nanoparticles.

6p dianmotminh02 03-05-2024 7 2   Download

The 3D printing PMMA/ZrO2 filaments with a diameter of 1.75±0.05 mm were fabricated by using a single-screw extruder at temperatures of four heating zones of 190, 200, 210, and 210°C. Testing samples were prepared from the extruded filaments by using a fusion deposition modeling 3D printer and a Haake MiniJet piston injection molding machine. Fourier transform infrared spectroscopy, mechanical properties, field emission scanning electron microscopy (FESEM), differential scanning calorimetry, and thermogravimetric analysis of the filaments were investigated.

9p dianmotminh02 03-05-2024 2 1   Download

In the present study, a complex between 8-hydroxyquinoline and cerium (III) (CeHQ) was synthesized in the presence of triethylamine. Afterwards, the complex was characterized by Field Emission Scanning Electron Microscopy (FESEM), Fourier-transform infrared spectroscopy (FTIR) and Thermo-Gravimetric Analysis (TGA). The inhibition efficiency of the Ce-HQ complex for the corrosion of carbon steel, evaluated by both Electrochemical Impedance Spectroscopy (EIS) and Potentiodynamic Polarization (PP) plots, reached 90 % after 2 h of immersion in a 0.01 M NaCl solution.

13p dianmotminh02 03-05-2024 6 2   Download

In this work, we report a direct growth of the VACNTs on several substrates by using hot-filament chemical vapor deposition (hot-filament CVD) and a catalytic buffer-layer structure. The buffer layer was the aluminum (Al) thin film used together with iron (Fe) as the catalyst.

8p tamynhan6 14-09-2020 11 1   Download