High temperature
-
Ultra High Temperature Là công nghệ xử lý sản phẩm lỏng (sữa tươi, sữa đậu nành, nước trái cây…) ở nhiệt độ cao (135-140 oC) trong khoảng 2-5 giây, sau đó làm lạnh ngay, giúp giữ lại tối đa hương vị và giá trị dinh dưỡng của sản phẩm. Ưu điểm: Do thời gian giữ nhiệt rất ngắn(2-5s) nên sản phẩm ít bị biến tính. Giá trị dinh dưỡng và cảm quan hầu như không bị ảnh hưởng
28p binhminhsvdm 09-05-2012 850 126 Download
-
A reaction happens need the energy to vibrate the molecules and the reactant concentration enough. The energy here is often provided by heat. However, in living system, high temperature may harm the biological structure Truly that the concentration in living system is very low. So living organisms solve these problems by using enzyme
94p zingzing09 21-10-2012 65 9 Download
-
The aim of this Master of Engineering (MEng) - Aerospace thesis is to study the structural response and failure of aerospace grade composites during exposure to fire. Key aspects of the research are to analyse the thermal and mechanical responses of laminates and sandwich composites in high temperature and fire environments, which result in softening and structural failure. The research is concentrated on carbon/epoxy laminates and sandwich composites, which are the most common composite materials used in aerospace structures.
209p runthenight05 01-03-2023 9 3 Download
-
Municipal wastewater treatment plants generally utilise biological activated sludge processes to remove organic compounds and nitrogen. The biological nitrogen removal (BNR) occurs in two steps, nitrification (ammonium removal) and denitrification (nitrates removal). This study focused on a medium-sized wastewater treatment plant (WTP) which experienced poor nitrification for years, mainly when the weather temperature drops.
125p runthenight07 01-03-2023 8 3 Download
-
This thesis has two key results, a study on the effect of carbon in electron-beam deposited platinum nano-wires and a novel temperature sensing glass substrate for marker-free thermometry. The thesis focus on the effect of carbon contamination in plasmonic nano-wires composed mainly of platinum produced from FEBID. Because carbon acts as an insulator in the platinum/carbon composite, we model the effect of carbon impurities by reducing the charge carrier concentration inthe platinumwire.
137p runthenight04 02-02-2023 10 2 Download
-
Thermostable and highly water-soluble polymers are essential for polymer flooding — one of the most effective methods used in the enhanced oil recovery (EOR) in hightemperature (HT) offshore reservoirs. In this research, the copolymerization reaction of acrylamide (AM) and N-vinylpyrrolidone (NVP) monomers were performed via a freeradical mechanism induced by gamma-rays (γ-rays) irradiation.
79p viabigailjohnson 10-06-2022 16 4 Download
-
Anharmonic effective potential, local force constant and correlation effects in XAFS of BCC crystals
Analytical expressions for the anharmonic effective potential, local force constant, Displacement-displacement Correlation Function (DCF) CR and Debye-Waller factor described by the Mean Square Relative Displacement (MSRD) σ2 and by the Mean Square Displacement (MSD) u2of bcc crystals in the X-ray Absorption Fine Structure (XAFS) have been derived. The effective interatomic potential of the system has been considered by taking into account the influences of nearest atomic neighbors, and it contains the Morse potential characterizing the interaction of each pair of atoms.
8p 12120609 01-06-2020 15 2 Download
-
The catalyst 7.5% NiO/TiO2 and seven samples of NiO/γ-Al2O3 with NiO content from 7.5% to 60% have been obtained and studied. Physico-chemical characteristics of the catalysts were determined by methods of Adsorption (BET), X-ray Diffraction (XRD), TemperatureProgrammed Reduction (TPR) and Hydrogen Pulse Titration. The catalytic properties of the obtained samples were investigated in the reaction of CO methanation at temperatures 180 – 220◦C and mole ratios hydrogen/carbon monoxide 25-100.
16p 12120609 01-06-2020 7 1 Download
-
The blends based on polyvinyl chloride (PVC), nitrile-butadiene rubber (NBR), natural rubber (NR) and polyethylene (PE) were made by three different methods. The mechanical properties of these blends in dependence of mixing time and temperature were characterized. The result showed that the two-step blending method, where PVC and NBR were first mixed together and then blended with NR and PE, is the best one to prepare blends with high mechanical properties.
6p 12120609 01-06-2020 16 0 Download
-
Sustainability of thorium fuel in a Pebble-Bed Fluoride salt-cooled High temperature Reactor (PB-FHR) is investigated to find the feasible region of high discharge burnup and negative Flibe (2LiF-BeF2) salt Temperature Reactivity Coefficient (TRC).
12p christabelhuynh 30-05-2020 7 0 Download
-
In this study, reaction rates of the thermal decomposition reaction of 13 kinds of nitrates, which are main constituents of simulated HLLW (sHLLW), were investigated using thermogravimetrical instrument in a range of room temperature to 1000 °C.
7p christabelhuynh 30-05-2020 11 1 Download
-
This paper also discusses needs and challenges associated with advanced instrumentation for the multi-loop facility, which could be further applied to advanced high-temperature reactors. Based on its relevance to advanced reactor systems, the new facility has been named the Advanced Reactor Technology Integral System Test (ARTIST) facility.
10p christabelhuynh 31-05-2020 18 1 Download
-
Research institutes and also industrial companies in Czech Republic are involved in High Temperature Gas Cooled Reactor (HTGR) program and activities related to the study of advanced materials and HTGR technologies. These activities are supported by EC (within international projects, e.g. FP7-ARCHER, ALLIANCE, GoFastR can be mentioned) and also by Technology Agency of Czech Republic.
7p christabelhuynh 30-05-2020 35 1 Download
-
Study of high temperature steam oxidation kinetics during the high temperature oxidation was carried out on the sponge base E110 cladding tubes material in the temperature range 600–1300 °C. The oxidation kinetics derived from the weight gain measurements showed a parabolic rate law for temperatures 1100 °C and higher only.
6p christabelhuynh 30-05-2020 12 1 Download
-
This work aims at determining the key parameters controlling the average oxygen profile within the sample in the two-phase regions at 1200 °C. High temperature steam oxidation tests interrupted by water quench were performed using pre-hydrided Zircaloy-4 samples.
8p christabelhuynh 30-05-2020 10 0 Download
-
In this context, the European Nuclear Cogeneration Industrial Initiative (NC2I) has launched the projects NC2I-R and GEMINI+ aiming to prepare the deployment of High Temperature Gas-cooled Reactors (HTGR) for this purpose.
7p christabelhuynh 29-05-2020 16 3 Download
-
MYRRHA is a multi-purpose research reactor able to operate in sub-critical and critical modes and currently in the design phase at SCK•CEN. The choice of LBE was driven by its chemical stability, low melting temperature, high boiling point, low chemical reactivity with water and air and a good neutronic performance.
9p christabelhuynh 29-05-2020 18 1 Download
-
In this investigation, neodymium orthoferrite (NdFeO3) nanoparticles has been synthesized through ultrasonic method in the presence of octanoic acid as surfactant. This method comparing to the other methods is very fast and it does not need high temperatures during the reaction.
8p tocectocec 25-05-2020 4 1 Download
-
An effective and expeditious method of the synthesis of a highly functionalized piperidines, catalyzed by nontoxic, recyclable and environment friendly sodium lauryl sulfate (SLS), via one-pot multi-component condensation of aldehydes, amines and β-ketoesters in water at room temperature, has been developed.
8p tocectocec 25-05-2020 11 2 Download
-
The article discusses the strength of concrete and other brittle materials in the case of nonuniform biaxial type of compression (σ1 > σ2 > 0) and triaxial compression of σ1 > σ2 = σ3 > 0 type (it was assumed that σ> 0 corresponds to compression). I
6p tohitohi 19-05-2020 17 0 Download