Master's thesis of Technology

Once entirely the domain of space-borne applications, the effects of high energy charged particles on electronics systems is now also a concern for terrestrial devices. Reconfigurable components such as FPGAs are particularly vulnerable to radiation single event effects (SEU) as they carry a large amount of memory within a relatively small amount of circuit area. This thesis presents a Silicon on Insulator (SOI) based configuration memory system in a radiation hard reconfiguration system.

101p runthenight05 01-03-2023 9 3   Download

The aim of this research is to explore the application of natural biopolymer chitosan for the purpose of incorporating fragrance oil into automotive fabrics and its antimicrobial properties relevant to automotive interior textiles. Chitosan was selected for this study for its film forming ability and inherent antimicrobial attributes. 100% polyester automotive fabrics were used in this study, as 100% polyester is predominant fibre used for automotive interior textiles.

118p runthenight05 01-03-2023 9 3   Download

This research has been undertaken by theoretical and practical investigation via a critique of the historical and contemporary topics surrounding women’s apparel size definitions. This analysis has informed the development of an alternative size model to assist design and production of mass market apparel. There is expectation from both apparel manufacturers and consumers that apparel standards are necessary for the efficient production and distribution of mass market apparel.

121p runthenight05 01-03-2023 6 3   Download

The broad objective of research reported here was to develop a multi-publishing workflow for student atlases.

162p runthenight05 01-03-2023 5 3   Download

This research investigates an innovative approach to augmenting the current evaporation pond disposal approach used in Australia, and other regions around the world. The augmentation involves the incorporation of solar plate collector technology. The technology is widely used across the world to collect solar power to drive a range of commercial and domestic applications, most commonly solar hot water systems.

110p runthenight07 01-03-2023 11 4   Download

CRM is a relative new technology in which allows organisations to capture data, and improve customer service capabilities. IT strategy planning is the process of planning, and implementing changes, to ensure organisations have best practise in regards to decision making and infrastructure. At the current moment there is little information domestically available in Australia about CRM systems. This thesis provides some insight, in-regards to CRM and IT strategy planning practice, in Australia.

160p runthenight07 01-03-2023 6 3   Download

The limits of current micro-scale technology is approaching rapidly. As the technology is going toward nano-scale devices, physical phenomena involved are fundamentally different from micro-scale ones. Principles in classical physics are no longer powerful enough to explicate the phenomena involved in nano-scale devices. At this stage, quantum mechanic sheds some light on those topics which cannot be described by classical physics. The primary focus of this research work is the development of an analysis technique for understanding the behavior of strongly perturbed harmonic oscillators.

165p runthenight07 01-03-2023 6 3   Download

This study examined the current situation of the Serbian Orthodox Church both in its Australian and transnational contexts since the Serbian Orthodox Church functions as transnational network with churches linked globally. The research strategy was a combination of qualitative and quantitative methods. This included a case study approach which focused in four parishes in Australia, including interviews which involved forty six participants affiliated to Serbian Orthodoxy and four Serbian Orthodox priests who were individually interviewed.

164p runthenight07 01-03-2023 8 4   Download

The aim of this project is to provide a summary of the current knowledge on energy recovery options from wastewater treatment plants sludge and/or biosolids. This covers technologies as well as data from case studies and research experimental results. The focus of the study is the ATP. The project methodology comprised two stages. The first stage involved a review of the current literature.

166p runthenight07 01-03-2023 7 3   Download

The Australian music industry is growing and developing yet specific information about the ways in which distribution systems develop is limited. In this study I examined the growth and change of the Australian music value chain. This includes the development of digital distribution systems and the effect that peer‐to‐peer technology has on system development, specifically the disintermediation between consumers and artists to the detriment of the multinational value chains.

107p runthenight07 01-03-2023 9 4   Download

The objectives of the present study are: Justifying the possibility of using laser cladding technology as a repair method for refurbishment of worn railway axles without jeopardizing their fatigue properties; Analysis of crack initiation and propagation in laser clad samples.

130p runthenight07 01-03-2023 6 3   Download

Intrusion Detection (ID) is one of the active branches in network security research field. Many technologies, such as neural networks, fuzzy logic and genetic algorithms have been applied in intrusion detection and the results are varied. In this thesis, an Artificial Immune System (AIS) based intrusion detection is explored. AIS is a bio-inspired computing paradigm that has been applied in many different areas including intrusion detection.

74p runthenight07 01-03-2023 8 2   Download

The overall aim of this study is to determine the most effective way to reduce the radiation dose to the breast during non-breast related CT scans, whilst still maintaining a suitable image quality. This study will attempt to compare the doses and noise of various protocols that can be used for dose reduction, including tube current modulation, bismuth breast shields and manual reduction of tube current.

111p runthenight07 01-03-2023 10 3   Download

As science and technology has developed, the manner by which drugs can be delivered has grown. Medicines may be taken orally, applied as topical pastes, creams or oils, patches or administered by direct injection to the body. This research explores an alternative method for the delivery of therapeutic compounds to the body. The basis of the study involves the application of traditional medicinal compounds used to cure minor neck and back pains through transdermal topical application, using a textile substrate as the carrier.

128p runthenight07 01-03-2023 10 3   Download

The aim of this research is to improve the reliability of the dynamic formula. This research program will concentrate on the proposal of a correction factor to adjust for this dynamic component similar to the damping parameter used in the Wave Equation Analysis and validate its reliability experimentally and theoretically. Similarly, the issue of the variation in the hammer energy delivered to pile needs to be improved by the adoption of new technology and validate experimentally.

207p runthenight07 01-03-2023 6 3   Download

This study investigates students’ expectations and experiences of blended learning at Hanoi Open University, Vietnam. In recent years, the Vietnamese government has produced a number of polices advocating the use of ICT in education, including blended learning, aligning this implementation with its goals to modernise. While there has been considerable research around blended learning in higher education in the west, including in the USA, UK and Australia, research in Vietnam is relatively new.

126p runthenight07 01-03-2023 11 6   Download

This research project investigates the relationship between music composition, particularly electronic pop, and sound design (the editing/mixing of sound for cinema), with its main focus on Multi-channel (Surround Sound) techniques. It proposes new practices that extend music compositional tools into embracing spatial techniques employed by sound design. My research encompasses both the conceptual development (ie spatial techniques in creating narratives) and the practical issues relating to the production and technology needed for such works.

44p runthenight07 01-03-2023 10 4   Download

The objective of the present study is to produce base layer winter active sportswear fabrics using natural and synthetic fibres and their blends which will deliver good comfort properties. Polyester, wool and bamboo fibres were selected for this study. Polyester is the most common fibre used in sportswear, wool is increasingly being used in sportswear and bamboo is a relatively new fibre that offers properties suitable for base layer sportswear. Bamboo is also regarded as a 'green' and eco-sustainable fibre.

204p runthenight07 01-03-2023 4 2   Download

What are the key aspects to achieving acceptable usability outcomes for information systems being developed? The changing technologies and increased usage across the general population, the impacts of this in our everyday lives, at work and at leisure are exponentially increasing. The interfaces and interaction styles presented as part of these technologies have been challenged to be more intuitive, contextually sensitive, location aware, human centred and aimed at a larger community of stakeholders.

376p runthenight04 02-02-2023 6 2   Download

The main aim of this study is to investigate utilising root-like architectures to improve the interfacial strength of pin-integrated hybrid composite-metal structures. Joints are critical elements in aircraft structures and require special consideration due to their vital role in the structural integrity of airframes. Although bonded and bolted systems are used commonly in engineering applications, pinning technologies have shown tremendous potential for hybrid joints.

198p runthenight04 02-02-2023 6 2   Download