Mixed mode loading

Mixed mode I/II stress intensity factors of an edge slant-cracked plate under tensile loading were assessed. A two-dimensional finite element analysis was employed using ABAQUS. Various crack lengths and angles were analyzed. The effect of the crack location at the plate edge was also examined. Crack initiation angles were calculated.

10p tohitohi 19-05-2020 22 2   Download

Two procedures to evaluate fracture resistance of notched components are proposed in this contribution: the Strain Energy Density (SED) over a control volume and the Cohesive Zone Model (CZM). With the aim to simplify the application of the two fracture criteria, the concept of the ‘equivalent local mode I’ is presented.

8p tohitohi 19-05-2020 15 1   Download

The present work summarizes some recent experimental, theoretical and numerical results on brittle fracture of isostatic polycrystalline graphite. The analyses have been carried out on V-notched samples under mixed mode (I+II), torsion and compression loading, considering various combinations of the notch tip radius, opening angle and notch tilt angle.

20p tohitohi 19-05-2020 21 1   Download

A new fracture test specimen is suggested and analyzed using finite element method. The mode I and mode II stress intensity factors as well as the T-stress were calculated for three geometries and loading conditions.

6p tohitohi 19-05-2020 16 2   Download

Extensive brittle fracture curves are presented in the present paper for engineering components weakened by a U-shaped notch under different in-plane loading conditions from pure mode I to pure mode II.

12p tohitohi 19-05-2020 14 1   Download

The curves were developed in a computational manner in terms of the notch stress intensity factors and based on the suitable failure concept of the maximum tangential stress (MTS) utilized frequently in the past by the author and his co-researchers for predicting mixed mode brittle fracture in extensive notched specimens.

20p tohitohi 19-05-2020 16 1   Download

In this paper, using higher-order terms of Williams’s series expansion and the maximum tangential stress criterion, the mixed mode I/II crack growth path of an angled crack plate subjected to biaxial far field loading is investigated theoretically.

8p tohitohi 19-05-2020 19 1   Download