Numerical results

This article presents a numerical investigation focusing on the temperature distribution of first-stage turbine rotor blades that do not feature internal cooling channels. The results indicate the regions of peak temperatures and evaluate rotor blade strength.

10p viengfa 28-10-2024 1 1   Download

The results of using machine learning via genetic programming (GP) to automatically generate novel effective length factor formula in accordance with AISC standard are presented in this article. The data points obtained from applying the numerical method equation solving for the transcendental equation for the effective length of the braced frame were fed into the machine learning algorithm.

5p vibecca 01-10-2024 3 1   Download

This paper presents experimental and numerical investigations to assess the relative fire structural resistance of thermo-mechanically compressed (or densified) spruce wood. The simulated thermal profiles, the mass loss as well as the charring depths were compared to the experimented results showing a fairly good agreement.

5p vibecca 01-10-2024 0 0   Download

This study presents numerical results regarding subsonic flow characteristics over axisymmetric boattail models equipped with longitudinal grooves, with the number of grooves ranging from 2 to 12.

12p vibecca 01-10-2024 1 0   Download

This work is devoted to conducting a new study for global dynamics and numerical simulation of a discrete-time computer virus propagation model, which was constructed in our recent work. By utilizing well-known results on asymptotic stability of discrete-time dynamical systems, we establish the global asymptotic stability of a unique viral equilibrium point, whereas only its local asymptotic stability was previously analyzed.

8p viyoko 01-10-2024 6 1   Download

One-loop contributions to the decay process \(H \to Z*\gamma \to {v_e}{v_e} \gamma \) in standard model are performed in the paper "One-loop contributions to in standard model \(H \to Z*\gamma \to {v_e}{v_e} \gamma \)". The detailed computations are carried out in unitary gauge. In physical results, we present numerical results for partial decay width and its distribution. We find that the partial decay width is given to 0.466 KeV. This result is in the upper bound of the current experimental data at the Large Hadron Collider.

9p xuanphongdacy09 29-09-2024 4 2   Download

The paper analyzes and determines the optimal parameters of tuned mass damper to reduce torsional vibration for the machine shaft. The research steps are as follows. First, the optimal parameters of tuned mass damper for the shafts are given by using the maximization of equivalent viscous resistance method. Second, a numerical simulation is performed for configuration of machine shaft to validate the effectiveness of the obtained analytical results.

9p vifilm 24-09-2024 1 1   Download

This paper presents the elastic large-displacement analysis of planar steel frames with flexible connections under static loads. The obtained numerical results are compared with those from previous studies to prove the effectiveness and reliability of the proposed element and program.

10p vifilm 24-09-2024 4 1   Download

A big question in the numerical approaches for the mechanical behavior of the textile-reinforced concrete (TRC) composite under tensile loading is how to model the cracking of the cementitious matrix. This paper presents numerical results of 3-D modeling of TRC composite in which the non-linear behavior model was used by considering the cracking for the cementitious matrix.

12p vifilm 24-09-2024 1 1   Download

This work aims to study the vibration characteristics of the rotating functionally graded porous beam reinforced by graphene platelets. The beam is mounted and rotated around a hub with a constant velocity. The present method results are also compared with numerical results available in the literature.

13p vifilm 24-09-2024 6 1   Download

In the present study, from recent experimental results of asymmetrical loading tests on SFRC beams without stirrups, three NLFE models have been validated and further developed to evaluate the impact that the ratio of shear span-to-depth (a/d) and the compressive strength of steel fiber concrete (SFC) have on the shear behavior and shear strength of SFRC beams without stirrups.

15p vifaye 20-09-2024 4 1   Download

In this study, we propose to build an equivalent 2D model to replace the 3D model of corrugated composite sheets, by the method of homogenization, to study the nonlinear mechanical behavior of corrugated core composite sheets. This model helps to significantly reduce the calculation time as well as the model building time. The model homogeneity is confirmed by comparing the numerical simulation results of the 2D model and the 3D model.

8p dathienlang1012 03-05-2024 2 0   Download

This paper describes an investigation of fluid flow through two tandem circular cylinders using Lattice-Boltzmann Method in direct numerical simulation. The diameter ratio of two circular cylinders, D1/D2 varies from 0.5 to 1.5, and spacing ratio (L/D2) varies from 1.5 to 10, whereas the Reynolds number of 100 is considered. The numerical model is well validated by comparing the results with those obtained in the literature.

8p dathienlang1012 03-05-2024 6 1   Download

In recent years, the fourth industrial revolution has been progressing strongly, resulting in numerous accomplishments that have profound implications for various industries and sectors of the economy, including the banking sector. In the context of the digital transformation boom, traditional banking models have undergone modifications and advancements with the aim of boosting competitiveness and efficiency, leading to the emergence of the Open banking .

3p zizaybay1101 09-05-2024 9 3   Download

In addition, we also show that our present solutions are valid for the problems of indentation by a rigid punch on an elastic half-space through a proper replacement of the contact radius and the corresponding material constant. Numerical results are provided to demonstrate the accuracy, applicability, and versatility of the developed solutions.

16p dianmotminh02 03-05-2024 7 2   Download

The present paper is focused on the impact of the dissolution mechanism of the different species (formed within a single bubble) on bubble chemistry. This process is analyzed on a range of ultrasound frequencies from 140 to 515 kHz, at an acoustic intensity of 1 W/cm². The obtained findings are compared to the results available in the literature.

14p dianmotminh02 03-05-2024 7 2   Download

In the course of current research the procedure of obtaining of the piecewise linear vibration systems time and frequency responses have been developed. The method is partly analytical and partly numerical and is based on combining of linear solutions of different sections in a cycle of motion. In a row with the method of obtaining of the exact steady state time and frequency response, also it is provided sensitivity analysis of the vibration isolator.

86p runthenight07 01-03-2023 8 3   Download

This thesis investigates the SPH capability available in the commercial Finite Element (FE) code LS-DYNA®, for water impact problems. Experiments have been conducted on rigid wedges impacting water, which were then simulated with the SPH method. Although certain limitations were experienced with the experimental results, a positive correlation was observed with the numerical technique, thus establishing SPH as a promising method for crashworthiness design.

176p runthenight07 01-03-2023 8 3   Download

This search resulted in the development of a practical software tool based on animated Venn diagrams (Dvenn) that attempted to exploit the inherent human ability to perceive quantities visually, a faculty described herein as visual numeracy. The exploitation of this faculty is considered here to be a valuable aid for group understanding of business presentation data. The development of the tool was an essential part of the research that was undertaken and the resulting software forms a significant portion of this practise based research.

237p runthenight04 02-02-2023 4 1   Download

In present paper "Equation of state and thermal expansion of metals with FCC structure: Application to Cu, Al and Ni", by the statistical moment method (SMM) we obtain the equation of state for metals with cubic structure at temperature 0 K and pressure P and from that obtain the expressions of lattice parameter and thermal expansion coefficient for these metals at temperature T and pressure P.

6p runordie3 27-06-2022 13 2   Download