Stress analysis

The dynamic response of a concrete pavement system with load transfer dowels under the effects of moving loads is a topic of interest to many scholars. However, to fully understand the nature of the stress-strain state of the concrete slab, load transfer dowels, and the subgrade in the pavement structure, further research is needed.

15p viyamanaka 06-02-2025 0 0   Download

This article deals with optimizing the shape of a bearing plate commonly found in mechanical engineering. The verification of the suitability of the newly optimized model will be done on the basis of a static simulation of the shape using Inventor Pro 2023 software.

7p viyamanaka 06-02-2025 1 1   Download

This paper presents a combined method utilizing FE analysis and MBD simulation for structural analysis in the time domain. The MBD model of the full vehicle is built with the object of the trailer frame transferred from the modal neutral file of the FE model.

11p viyamanaka 06-02-2025 2 2   Download

In this study, the deflection and stress field of perfect and imperfect (with and without porosities) functionally graded (FG) cylindrical panels are determined following the first-order shear deformation theory (FSDT). The panel rested on the twoparameter elastic foundation (Pasternak foundation) under pressure loads and worked in a hygro-thermal environment.

6p vibenya 31-12-2024 3 1   Download

Phosphoinositide-specific phospholipase C (PI-PLC) has been known as one of the key enzymes that involved in the phospholipid hydrolysis. However, the PI-PLC family in cassava has not been fully recorded. In this study, a comprehensive analysis of the PI-PLC family in cassava assembly has been performed based on various bioinformatics tools.

9p viprimi 16-12-2024 3 1   Download

Failure in power transformer can be catastrophic to electric systems, since transformers play a vital role in the power sector. Metallic particles in transformer oil lead to Partial discharge which can result in serious conditions.

8p lucastanguyen 01-06-2020 20 2   Download

The main purpose of this project is Optimization of Automotive Brake Disc and analysis the unsteady state thermal behaviour of the dry contact between the brake disc and pads during the braking phase.

10p lucastanguyen 01-06-2020 19 3   Download

The results indicated that the majority of employees belong to the age group of 20-25years. The result also showed that about two-third of ITES employees belong to the monthly income group of Rs 10000- 15000 and the majority of ITES employees are single.

8p guineverehuynh 21-06-2020 12 4   Download

For this study, different volume fraction (vol.%) of particulate alumina (Al2O3) reinforced aluminium alloy (Al 6061) with 5 vol.%, 15 vol.% and 25 vol.% are produced by powder metallurgy method. These samples were subjected to biaxial stresses in order to investigate the behaviour of the metal matrix composites (MMCs). Microstructure analysis on the individual sample before and after loading was performed under scanning electron microscopy. The small particles of 2 µm in size have exhibited strong interfacial bonding with the matrix.

15p 12120609 01-06-2020 12 1   Download

This study has been made in an attempt to find the structural integrity of the Chashma Nuclear power plant-1 FA skeleton at room temperature. The finite element (FE) analysis has been performed using ANSYS, in orderto determinethe elongationofthe FAskeleton as wellas the locationofmax. stress and stresses developedin axial direction under tensile load of 9800 N or 2 g being the FA handling or lifting load [Y. Zhang et al., Fuel Assembly Design Report, SNERDI, China, 1994].

6p christabelhuynh 30-05-2020 29 2   Download

The linear elastic analysis of homogeneous, isotropic cracked bodies started in the 1900s. The existence of three dimensional corner point effects in the vicinity of a corner point where a crack front intersects a free surface was investigated in the late 1970s. An approximate solution by Bažant and Estenssoro explained some features of corner point effects but there were various paradoxes and inconsistencies.

10p tohitohi 19-05-2020 22 3   Download

Mixed mode I/II stress intensity factors of an edge slant-cracked plate under tensile loading were assessed. A two-dimensional finite element analysis was employed using ABAQUS. Various crack lengths and angles were analyzed. The effect of the crack location at the plate edge was also examined. Crack initiation angles were calculated.

10p tohitohi 19-05-2020 22 2   Download

One of the specimens to investigate the mode-I fracture toughness of rock and geo-materials is semi-circular bend (SCB) specimen. In general, initial cracks in rock test specimens are produced in two shapes: straight-edge cracks and chevron notches. The ISRM suggested SCB specimen has straight shaped notch.

10p tohitohi 19-05-2020 10 1   Download

Zirconia/ veneer bi-layered components are extensively used in dental restoration technology to improve resistance of tooth’s surface from decay. The direction of the fracture propagation at the interface of zirconia and veneer is investigated in this paper.

8p tohitohi 19-05-2020 10 1   Download

This paper derives a semi-analytical solution to determine displacements and stresses in a thick cylindrical shell with variable thickness under uniform pressure based on disk form multilayers. The proposed study partitions the thick cylinder into disk-layer parts based on their thickness of the cylinder.

14p tohitohi 19-05-2020 20 1   Download

Head injuries are among the dangerous injuries which are common in all sport types. In the present study, the dynamic response of a punch to the head of a Wushu fighter was simulated by modeling the human head in ABAQUS software.

10p tohitohi 19-05-2020 17 1   Download

In this paper, an extended forming limit stress diagram (EFLSD) was applied to predict neck initiation failure in tube hydroforming of metal bellows. The proposed EFLSD was used in conjunction with ABAQUS/ EXPLICIT finite element simulations to predict the onset of necking in tube hydroforming of metal bellows.

10p tohitohi 19-05-2020 22 1   Download

Mode I and mode II stress intensity factors (SIFs) through the thickness of edge crack in semi circular bend (SCB) and center cracked circular disc (CCCD) specimens have been analyzed using three dimensional finite element analysis.

10p tohitohi 19-05-2020 13 0   Download

Bài tập này chỉ như một ví dụ cho các bạn biết cách sử dụng và đọc các thông số trên modun stress analysis, thực hiện chiến năng này trong modun Evironments click vào Stress analysis,... Tham khảo tài liệu "Hướng dẫn cách khai thác kết quả trên stress analysis trên inventor" để hiểu hơn về vấn đề này.

6p vantu64dcdm3020 01-10-2015 265 23   Download

Sau khi ta sử dụng stress analysis để tính toán chi tiết về khả năng ứng suất, chuyển vị, hệ số an toàn, biến dạng. Ta có thể lưu file này ở dạng một file web hoặc xuất sang word để thuyết trình. Tham khảo tài liệu "Xuất kết quả tính toán stress analysis trên inventor ra web và word" để nắm bắt nội dung chi tiết.

5p vantu64dcdm3020 01-10-2015 139 9   Download