Engine specifications

The main objective of this paper is to categorize the available literature (analytical/experimental). The discussion remains descriptive, and the reader is recommended to consult the cited references for specifics on parameters and mathematical models. Three phases were adopted to conduct this literature review: (a) conducting the review, (b) conducting the analysis, and (c) writing up the review.

12p tuetuebinhan000 23-01-2025 2 2   Download

Toyota tundra – new features is a 4.6-liter, 32-valve DOHC V8.This engine uses the Dual Variable Valve Timing-intelligent (Dual VVT-i) system, Direct Ignition System (DIS), Acoustic Control Induction System (ACIS), Electronic Throttle Control System-intelligent (ETCS-i), air injection system and Exhaust Gas Recirculation (EGR) control. These control functions achieve improved engine performance, fuel economy, and clean emissions.

95p endlesslovelp 09-03-2015 73 10   Download

Formal methods mathematical languages, techniques and tools, used to specify and verify systems, goal is help engineers construct more reliable systems. Introduction to Formal Methodspresents about introduction; formal specification; formalformal verificationverification; model checking; theorem proving.

29p ngkhacvu 22-05-2015 75 7   Download

Lecture "Software engineering - Lecture 10: Specifying systems" has contents: Use of UML for ODP system specifications, use of UML for ODP system specifications, UML object constraint language.

42p bautroibinhyen13 10-01-2017 74 4   Download

This thesis presents a study of impedance optimisation of active microstrip patch antennas to multiple frequency points. A single layered aperture coupled microstrip patch antenna has been optimised to match the source reflection coefficient of a transistor in designing an active antenna. The active aperture coupled microstrip patch antenna was optimised to satisfy Global Positioning System (GPS) frequency specifications.

137p runthenight05 01-03-2023 13 3   Download

The specific objectives of this study are: 1. To conduct a literature review on carbon-based hydrogen storage electrodes and direct proton absorbance in various forms of carbon; 2. To prepare and characterise activated carbon samples with proper porosity for the present application; 3. To manufacture and characterise a range of composite materials containing carbon material and a proton-conducting medium such as nafion in various levels of hydration 4. To fabricate a number of membrane-electrode-assembly (MEA) from the composite materials;…

264p runthenight05 01-03-2023 9 3   Download

The Australian music industry is growing and developing yet specific information about the ways in which distribution systems develop is limited. In this study I examined the growth and change of the Australian music value chain. This includes the development of digital distribution systems and the effect that peer‐to‐peer technology has on system development, specifically the disintermediation between consumers and artists to the detriment of the multinational value chains.

107p runthenight07 01-03-2023 13 4   Download

Tensegrity is a structural system constructed of tensile cables and compressive bars. This thesis proposes several general methods for creating tensegrity structures. The author has developed new methods for creating specific tensegrity cells and the corresponding computer code. Furthermore, the author has constructed various physical models to validate the methods. A proposal for an observation tower on top of the Eureka building in Melbourne has also been devised by the author.

88p runthenight07 01-03-2023 7 3   Download

The specific research objectives of this study are: 1. The development of a high throughput method for evaluation of alloys (5xxx Al as model materials in this work) subject to pitting; 2. Understanding the roles of variation in functional groups' in determining the inhibition efficiency; 3. Elucidating the inhibition mechanisms; and 4. Unveiling the role of intermetallic present in Al matrix and their contribution to the inhibition mechanism, particularly the long-term durability of the inhibitor systems.

104p runthenight04 02-02-2023 13 2   Download

One of the main objectives for this thesis is to provide an extensive literature review on the knowledge of the failure of trees in general and specifically Eucalyptus. By doing so, gaps in the literature and research will be revealed and then the remaining objectives will be selected experimental work filling the gaps for Eucalypts.

103p runthenight04 02-02-2023 5 2   Download

The broad aim of this research project is to optimize planned and emergency maintenance tasks and timings for tram tracks. Consistent with that broad aim, the following specific objectives are identified: Understand the factors affecting the degradation of tram tracks; develop a degradation prediction model for tracks as a function of the influencing factors; evaluate the time and type of maintenance required for deteriorated rail tracks.

101p runthenight04 02-02-2023 9 2   Download

The aim of this project was to design, fabricate and characterise multifunctional structural composites incorporating phase change materials for thermal management applications. The specific research objectives to achieve this goal were formulated as follows: Investigate effective methods to integrate microencapsulated PCMs into glass fibrereinforced epoxy composites; Evaluate the mechanical properties of micro-PCMs enhanced FRP composites and investigate associated failure mechanisms; Study the thermal management effectiveness of micro-PCMs enhanced FRP composites.

125p runthenight04 02-02-2023 12 3   Download

In Lecture "Introduction to software engineering - Week 1: Course introduction", you will learn to: A general introductory course in software engineering; Introduces important concepts such as software processes and agile methods, and describes essential software development activities, from initial software specification through to system evolution; develop software in multi-person teams by applying software engineering principles.

11p larachdumlanat 09-11-2020 20 3   Download

This dissertation aims at developing accurate and efficient approaches of 8 designing shallow UWA channel simulators based on the measurement data of the real UWA channel in a specific shallow water environment.

128p cotithanh000 07-10-2019 12 2   Download

Research objectives: To find scientific solutions for urban drainage issues and to improve river and pipe hydraulic coupling model for suitable urban application under specific conditions of strong tidal impact, heavy rainfall and rapid urbanization in Viet Nam.

25p change03 06-05-2016 41 3   Download

Bài giảng "Công nghệ phần mềm - Chapter 3: Requirements Engineering" presentation of content: Functional and non-functional requirements, the software requirements document, requirements specification, requirements engineering processes,... Invite you to reference.

11p doinhugiobay_15 25-02-2016 85 4   Download

Objectives of doctoral thesis Analysis of influencing parameters and basics of determining resistance factors of drilled shafts used in bridge substructures in Ho Chi Minh city: Determine resistance factors according to soil base strength which is equivalent to methods presented in specifications being applied.

27p nganhanggddt2014 01-07-2014 70 7   Download

The thesis does not focus on introducing IM tools and techniques applied them in specific situations, such as marketing techniques through search engine ) SEM (Search Engine Marketing), Marketing on social networks ) SMM (Social Media Marketing)...; only focus on studying process of IM activity in general, from analysing information, planning, building strategy, selecting tool and implementing the plan and testing the correction. Related to respondents: Survey of SMEs, satisfying the conditions.

0p nguyenthiminh32 12-07-2014 90 10   Download

In recent years, legislative and market requirements have driven the need to reduce fuel consumption while meeting increasingly stringent exhaust emissions. This trend has dictated increasing complexity in automotive engines and new approaches to engine design. A key research objective for the automotive engineering community has been the potential combination of gasoline-engine specific power with diesel-like engine efficiency in a cost-competitive, production-feasible power train.

21p minhtrong90 06-05-2013 91 6   Download

In recent years major progress has been made in elucidating the mechanism and structure of catalytic RNA molecules, and we are now beginning to understand ribozymes well enough to turn them into useful tools. Work in our laboratory has focused on the development of twin ribozymes for site-specific RNA sequence alteration. To this end, we followed a strategy that relies on the combination of two ribozyme units into one molecule (hence dubbed twin ribozyme).

11p fptmusic 11-04-2013 43 2   Download