Power calculations

Convolutional operations on neural networks are computationally intensive tasks that require significant processing time due to their reliance on calculations from multiplication circuits. This study implements and evaluates the performance of the XNOR-popcount design at the transistor-level on the Cadence circuit design software using 90nm CMOS technology.

9p viinuzuka 28-02-2025 4 1   Download

In this laboratory experiment, you will use SPICE to study sinusoidal waves on lossless transmission lines. Our goal is for you to become familiar with the basic behavior of waves reflecting from loads in transmission lines, and compare the simulations with numeric calculations and the Smith Chart.

30p nhutuanvn91 22-04-2013 125 18   Download

Bài 5 trình bày một số vấn đề đặc biệt như: Phân tầng (stratification) và phân khối (blocking), tính cỡ mẫu và sai số của ước lượng (Power Calculations), kiểm tra điều kiện cân bằng. Mời các bạn cùng tham khảo.

32p shiwo_ding4 02-05-2019 48 5   Download

To study the scientific basis to build the optimal calculation model of electricity sales for the system of staged reservoirs under competitive power generation conditions in order to provide operational instructions in combination with the coordination chart deliver the full annual output contract and drive to the largest revenue.

27p hobbsandshaw 09-06-2021 17 4   Download

Proposed solutions to improve the calculation speed for total transmit power minimum problem in multi-antenna wireless transmission network by using optimization techniques.

27p gaocaolon6 30-07-2020 44 3   Download

Models representing uncertainty factors; data mining techniques; calculation methods of power systems taking into account uncertainty factors.

31p gaocaolon6 30-07-2020 24 3   Download

The main objective of this review is to show the reader the importance of the proper choice of an aero profile and its influence for the calculation during the design of rotor blades and the performance of hydrokinetic turbines.

12p lucastanguyen 01-06-2020 17 2   Download

The paper presents the study of high harmonics influence on power metering by static meters for active and reactive energy. The review and analysis of manufacturer’s documents and standards in the field of electricity meters testing was conducted and mathematical models for calculating active and reactive energy were identified.

6p lucastanguyen 01-06-2020 14 2   Download

We have investigated the thermodynamic properties of the cubic zirconia ZrO2 using the statistical moment method in the statistical physics. The free energy, thermal lattice expansion coefficient, specific heats at the constant volume and those at the constant pressure, CV and CP , are derived in closed analytic forms in terms of the power moments of the atomic displacements.

16p 12120609 01-06-2020 13 1   Download

The set of intracavity field equations describing the evolution of intra-cavity pumping, Stokes and anti-Stokes powers of Raman laser is presented. Most attention is given to intra-cavity competition of two Raman waves, which depends on cavity properties, frequency shift and phase mismatch. The calculated results are based on Ge-doped and D2-gas-in glass fiber lasers at CW-regime and pulse-pumped regime.

8p 12120609 01-06-2020 13 2   Download

In the field of severe accident, the description of corium progression events is mainly carried out by using integral calculation codes. However, these tools are usually based on bounding assumptions because of high complexity of phenomena.

8p christabelhuynh 31-05-2020 14 2   Download

The goal of this study is to look after the amount of information that is mandatory to get a relevant parameters optimisation by data assimilation for physical models in neutronic diffusion calculations, and to determine what is the best information to reach the optimum of accuracy at the cheapest cost.

8p christabelhuynh 31-05-2020 19 3   Download

The purpose of this paper is to model the operation of the Shutdown Cooling System (SDCS) for CANDU 6 nuclear power plants in case of LOCA accidents, using Flowmaster calculation code, by delimiting models and setting calculation assumptions, input data for hydraulic analysis and input data for calculating thermal performance check for heat exchangers that are part of this system.

7p christabelhuynh 31-05-2020 22 2   Download

Evaluating the neutronic state (neutron flux, power . . . ) of the whole nuclear core is a very important topic that has strong implication for nuclear core management and for security monitoring. The core state is evaluated using measurements and calculations.

9p christabelhuynh 31-05-2020 19 1   Download

In this study, we use MIXOPTIM, a Monte-Carlo simulator of the behavior of a mix of power sources on a territory, to evaluate the performance of the present EU power mix. After a validation on the French mix, we applied it to the whole EU territory and made variational calculations around the present mix to evaluate the performance impacts induced by small changes in installed renewable power and nuclear power.

5p christabelhuynh 30-05-2020 8 1   Download

A correlated sampling technique has been implemented to estimate the impact of cross section modifications on the neutron transport and in Monte Carlo simulations in one single calculation. This implementation has been coupled to a Total Monte Carlo approach which consists in propagating nuclear data uncertainties with random cross section files.

9p christabelhuynh 29-05-2020 11 2   Download

Deterministic uncertainty propagation methods are certainly powerful and time-sparing but their access to uncertainties related to the power map remains difficult due to a lack of numerical convergence. On the contrary, stochastic methods do not face such an issue and they enable a more rigorous access to uncertainty related to the PFNS.

5p christabelhuynh 29-05-2020 11 2   Download

Objective of the thesis For the purpose of building a model of electrical generator for sea wave energy, the device operates efficient and in suitable to Vietnam's sea condition; determining the optimal damping coefficient of the generating motor, model parameters to received the maximum output power; design, fabrication of the electrical generator with the output voltages are 12 VDC, 220 VAC frequency 50 Hz and pure sine wave.

27p xacxuoc4321 08-07-2019 47 6   Download

Research targets of the thesis: (i) To thereticallystudy the overall characteristics of MIH and their impacts based on theoretical calculation (ii) To carry out experiments on the influence of alternating magnetic field, particle size and viscosity on specific loss power for CoFe2O4 and MnFe2O4, chosen as representative of respectively high K and low K magnetic nanoparticles; and to compare the experimental behavior with that obtained by theroretical calculations.

23p xacxuoc4321 08-07-2019 57 3   Download

In Design of high density transformers for high frequency high power converters, the abovementioned issues of high-frequency transformers are explored, particularly in regards to high-power converter applications. Loss calculations accommodating resonant operating waveform and Litz wire windings are explored. Leakage inductance modeling for large-number-of-stand Litz wire windings is proposed. The optimal design procedure based on the models is developed.

175p khoaicuto 19-03-2015 61 6   Download