Adsorption characteristics

Xem 1-20 trên 27 kết quả Adsorption characteristics
  • In the present study Terminalia chebula was used as an eco-friendly natural colorant for sustainable textile coloration of woolen yarn with primary emphasis on thermodynamic and kinetic adsorption aspects of dyeing processes. Polyphenols and ellagitannins are the main coloring components of the dye extract. Assessment of the effect of pH on dye adsorption showed an increase in adsorption capacity with decreasing pH. Effect of temperature on dye adsorption showed 80 C as optimum temperature for wool dyeing with T. chebula dye extract.

    pdf10p kequaidan1 16-11-2019 13 0   Download

  • Sewage sludge is the promising raw material for biosorbent preparation. In this work, we evaluated the heavy metals adsorption characteristics of alkali treated sewage sludge (ATSS) by equilibrium studies. The adsorption isotherms were fitted with Langmuir and Freundlich models. Comparing with untreated sewage sludge, the total adsorption capacity (qm) of ATSS (prepared with 0.125 mol/L NaOH) for Cd, Pb, Ni, increase d by 0.51, 0.70 and 0.32 mmol/g, respectively. When the NaOH concentration for ATSS preparation increase d from 0.125 mol/L to 0.

    pdf7p mentospurefresh 29-11-2019 5 0   Download

  • Trong bài viết này, các tác giả đã nghiên cứu khả năng ức chế ăn mòn cho thép thường trong dung dịch axit HCl của dịch chiết nước lá chè xanh bằng phương pháp điện hóa. Kết quả nghiên cứu cho thấy ở các nồng độ dịch chiết nước lá chè xanh khác nhau đều có khả năng ức chế ăn mòn thép thường. Hiệu quả ức chế ăn mòn nói chung tăng khi nồng độ dịch chiết tăng.

    pdf6p estupendo5 31-08-2016 25 1   Download

  • The properties and structure of carbon aerogel samples were investigated by nitrogen adsorption, four-point probe method and XRD diffraction. The results showed that carbon aerogel had structure between amorphous and graphite state.

    pdf8p ironman1234 06-06-2018 15 0   Download

  • In this work, the efficiency of a material prepared from red mud and rice husk ash (ZRM), in Cr(VI) absorption, without the use of acid to neutralize raw red mud (RM), was examined. The physicochemical characteristics of the obtained material were determined by several methods, including BET nitrogen adsorption, XRD, SEM, and TEM. ZRM was employed in the adsorption of Cr(VI) in solution at 25o C with a Cr(VI) concentration of 20 ppm.

    pdf5p caygaocaolon1 13-11-2019 2 0   Download

  • In this study, the adsorption behavior of some low-cost adsorbents such as peanut husk charcoal, fly ash, and natural zeolite, with respect to Cu2+, and Zn2+ ions, has been studied in order to consider its application to the purification of metal finishing wastewater. The batch method was employed: parameters such as pH, contact time, and initial metal concentration were studied. The influence of the pH of the metal ion solutions on the uptake levels of the metal ions by the different adsorbents used were carried out between pH 4 and pH 11.

    pdf7p kethamoi1 20-11-2019 11 0   Download

  • CuO-ZnO nanoparticles were successfully synthesized by the sol-gel method. Characteristic properties of the synthesized nanoparticles were investigated using X-ray diffraction (XRD), field emission scanning electron microscopy (SEM), transmission electron microscopy (TEM), Fourier-transform infrared spectroscopy (FT-IR), N2 adsorption/desorption isotherms, and BJH pore diameter distributions. The formation of highly crystalline CuO and ZnO was confirmed by XRD. FT-IR confirmed that Zn-O and Cu-O bonds were formed in the material.

    pdf6p 12120609 02-04-2020 4 0   Download

  • The authors of the article suggest simple and express method of spectrophotometric determination of iron (III) through derivatives of monoammonium salt of glycyrrhizic acid (MASGA). The spectral characteristics of the MASGA-Fe (III) complex - absorption maxima (λmax = 440nm) and the actual molar extinction coefficient (ε = 3,425 × 102) were determined. The optimal conditions for the determination of iron (III) in the range of its concentrations of 2,0–45,0 μg / 25 ml of solution have been established.

    pdf7p trinhthamhodang11 27-04-2021 4 0   Download

  • Adsorption by activated red mud (ARM) is investigated as a possible alternative to the conventional methods of Cr(VI) removal from aqueous synthetic solutions and industrial effluents. Adsorption characteristics suggest the heterogenous nature of the adsorbent surface sites with respect to the energy of adsorption. Various factors such as pH, contact time, Cr(VI) concentration, amount of adsorbent, and temperature are taken into account, and promising results are obtained.

    pdf0p tudoia 06-04-2011 69 6   Download

  • Tuyển tập các báo cáo nghiên cứu khoa học ngành toán học được đăng trên tạp chí toán học quốc tế đề tài: Adsorption and desorption characteristics of arsenic onto ceria nanoparticles

    pdf20p dauphong11 04-02-2012 41 5   Download

  • Understanding of the transport and attenuation of chemicals in the subsurface is fundamental to effective management of risks posed by chemicals and their possible impact on groundwater resources. A risk assessment approach to groundwater protection incorporates the three-stage combination of source, pathway and receptor. All three must be considered and understood to arrive at a balanced view of the risks to health of groundwater users. Informed consideration of the pathway, which in the context of this monograph means transport through the groundwater system, is vital.

    pdf83p cao_can 29-12-2012 52 4   Download

  • In this work, platinum nanoparticles were dispersed on SBA-15 mesoporous material by incipient wetness method and the synthesized materials were characterized by XRD, TEM, EDX spectroscopies and N2 adsorption-desorption isotherm measurement. The results indicated that 2D hexagonal ordered structure of SBA-15 was still maintained after grafting Pt on SBA-15 support and platinum nanoparticles existed both inside and outside the pore channels of SBA-15 material. Catalytic activity of these materials was tested in the aqueous phase D-glucose oxidation as a model reaction. ...

    pdf8p tuanlocmuido 13-12-2012 49 3   Download

  • Tuyển tập báo cáo các nghiên cứu khoa học quốc tế ngành hóa học dành cho các bạn yêu hóa học tham khảo đề tài: Adsorption and desorption characteristics of arsenic onto ceria nanoparticles Nanoscale Researc

    pdf20p sting07 16-02-2012 37 2   Download

  • The thesis has found a new method to increase the pore size of mesoporous carbon by filling the liquid glass into the pore of the template (silica SBA-15) before impregnating the carbon presource to limit the penetration of carbon sealed the pore system of SBA-15. Stability of mesoporous carbon is increases due to silicon are partially retained in materials. This technique opens the way of synthesis of mesoporous carbon as an adsorbent with a desired pore size and stability.

    pdf28p xacxuoc4321 08-07-2019 24 1   Download

  • Sepiolite has been treated with ethanol under isothermal conditions and characterized by XRD, SEM, FT-IR, and BET measurements. The materials showed a typical lamellar structure and fibrous morphology. After treatment of sepiolite, the surface area of the solid is significantly improved while the material structure still remains.

    pdf8p jangni 13-04-2018 18 0   Download

  • The studied adsorbent was prepared by the starch modified montmorillonite for the removal of Pb (II) ions from aqueous solution. Fourier-transformed infrared (FTIR) spectroscopy and X-ray diffraction (XRD) were used to determine the structure and characteristics of the adsorbent.

    pdf9p vidonut2711 08-11-2019 4 0   Download

  • Experimental aspect of the corrosion inhibition potential of adenine (AD), guanine (GU) and, hypoxanthine (HYP) was carried out using weight loss, potentiodynamic polarization and electrochemical impedance spectroscopy (EIS) methods while the theoretical aspect of the work was carried out by calculations of semi-empirical parameters (for AM1, MNDO, CNDO, PM3 and RM1 Hamiltonians), Fukui functions and inhibitor–metal interaction energies.

    pdf15p trinhthamhodang1 16-11-2019 10 0   Download

  • Performance of a column bed device packed with specially fabricated Plaster of Paris (POP) pellets was evaluated for the removal of a potentially toxic Polycyclic Aromatic Hydrocarbon (PAH) Pyrene (Pyr). The effect of initial Pyr concentration, flow rate, and adsorbent dosage was investigated on Pyr adsorption characteristics of two types of pellets (uncoated and adsorbent coated). Maximum Bed capacity (Mb), percentage removal and equilibrium Pyr uptake were calculated and breakthrough curves were plotted.

    pdf18p trinhthamhodang1212 06-04-2020 5 0   Download

  • In this paper, I present first-principle calculations which are performed by using combination of DFT and NEGF methods to investigate the adsorption of CO2 and NH3 molecules on straight and U-shaped GNRs junctions. The density of state, molecular orbital, adsorption energy, transmission spectrum, and current-voltage characteristics were analyzed.

    pdf8p tamynhan6 14-09-2020 8 0   Download

  • Understanding the adsorption characteristics of CH3OH and CH3O on the noble metal surfaces is essential for designing better catalysts for the on-board production of hydrogen from CH3OH. This study aims to provide insights into the adsorption behavior of these molecules on Ir(111) surface.

    pdf7p kequaidan10 05-03-2021 4 0   Download


207 tài liệu
1134 lượt tải

p_strKeyword=Adsorption characteristics

nocache searchPhinxDoc


Đồng bộ tài khoản