
Elasticities
-
This article presents the study of calculating the draft of continuous floating bridge assembled from plastic buoys. The author calculates the draft by two different methods, which are theoretical calculation and finite element modeling using SAP2000 software, to verify the discrepancy of the results of these two methods.
11p
viyamanaka
06-02-2025
2
1
Download
-
This study is devoted to determining dynamic parameters of dense coral sand using Controls dynamic triaxial compression testing device under large deformation and different confining pressure conditions. Parameters analyzed in the present work include excess pore pressure, damping ratio, dynamic elastic modulus and dynamic shear modulus.
12p
viyamanaka
06-02-2025
2
1
Download
-
This article investigates the effects of vertical ground motion on the seismic responses of reinforced concrete (RC) structures. Conventional seismic design primarily focuses on horizontal ground motions, often neglecting the significant impacts of vertical accelerations.
17p
viyamanaka
06-02-2025
1
1
Download
-
Di xa răng nanh và đóng khoảng được xem là giai đoạn tốn nhiều thời gian trong điều trị chỉnh hình răng mặt. Việc tăng tốc giai đoạn này sẽ giảm thời gian điều trị tổng thể, cải thiện sự hợp tác của bệnh nhân và giảm các tác dụng phụ có thể xảy ra. Bài viết trình bày so sánh kết quả điều trị đóng khoảng răng nanh hàm trên bằng dây Niti đóng khoảng và thun chuỗi elastic khi điều trị bằng khí cụ chỉnh hình cố định.
6p
viharuno
11-01-2025
3
1
Download
-
Epidemiological studies have found that physically active person have lower prevalence of cardiovascular disease compared to sedentary. Was to estimate the indexes of aortic elasticity in the sportsperson with different types of exercise.
5p
viuchiha
06-01-2025
1
1
Download
-
Soft tissue defects of the lower leg and foot are complicated injuries with numerous causes including trauma, ulcers, and Gout. Objectives: 1. To construct a map of the perforators of the peroneal artery and posterior tibial artery using a handheld Doppler ultrasound. 2. To evaluate the clinical outcome of perforator flaps to cover soft tissue defects in the lower leg and foot.
8p
viharuno
03-01-2025
5
2
Download
-
In this study, the deflection and stress field of perfect and imperfect (with and without porosities) functionally graded (FG) cylindrical panels are determined following the first-order shear deformation theory (FSDT). The panel rested on the twoparameter elastic foundation (Pasternak foundation) under pressure loads and worked in a hygro-thermal environment.
6p
vibenya
31-12-2024
4
2
Download
-
Mời các bạn cùng tham khảo tài liệu "Chapter 5: Elasticity and its application" dưới đây để có thêm tài liệu thử sức mình trước kỳ thi. Với các bạn đang học chuyên ngành Tài chính ngân hàng thì đây là tài liệu tham khảo hữu ích.
83p
apdoi90
20-10-2015
142
16
Download
-
Trong ngành kinh tế học, độ co giãn (tiếng Anh: elasticity) là đại lượng đặc trưng cho phản ứng của lượng cầu hoặc lượng cung trước sự thay đổi của một số biến khác.Độ co giãn của cầu (price elasticity of demand)thể hiện độ nhạy của lượng cầu trước thay đổi về giá của hàng hoá. Độ co giãn của cầu theo giá được ký hiệu là ED, ED được đo bởi trị tuyệt đối của thương số giữa phần trăm thay đổi trong cầu chia cho phần trăm thay đổi trong giá cả....
58p
hung127
02-06-2011
344
38
Download
-
Cung và cầu của một hàng hoá phụ thuộc vào nhiều biến số = định tính. Muốn phản ánh sự thay đổi về lượng = hệ số co giãn (Elasticity). Hệ số co giãn là một con số cho biết tỷ lệ phần trăm thay đổi của biến số này tương ứng với một phần trăm thay đổi của biến số kia.
40p
linhphung3112
26-10-2011
473
84
Download
-
Bài này gồm có những nội dung chính sau: Giá (price), cầu (demand) & cung (supply), hệ số co giãn (elasticity), thị trường (market) và cân bằng thị trường, giá trần (ceiling price), giá sàn (floor price), thất bại của thị trường (market failure), tác động ngoại lai (externalities), thông tin bất đối xứng (information asymmetry), hàng hóa công (puplic goods).
64p
tangtuy20
27-07-2016
82
11
Download
-
Luận án Tiến sĩ Công nghệ thông tin "Nghiên cứu phát triển kĩ thuật tránh va chạm cho robot tự hành" trình bày các nội dung chính sau: Tổng quan về tránh va chạm cho robot tự hành; Kĩ thuật tránh va chạm dựa trên cấu trúc cây phân lớp hệ bao BVH kết hợp với cải tiến thuật toán Elastic stripsl; Kĩ thuật tránh va chạm dựa trên tính toán và phân vùng đồng mức xác suất va chạm.
117p
gaupanda015
01-03-2024
25
12
Download
-
One of the main objectives for this thesis is to provide an extensive literature review on the knowledge of the failure of trees in general and specifically Eucalyptus. By doing so, gaps in the literature and research will be revealed and then the remaining objectives will be selected experimental work filling the gaps for Eucalypts.
103p
runthenight04
02-02-2023
5
2
Download
-
Managerial Economics - Homework 3: Market and demand analysis provide students with knowledge about moving to a higher price along a linear demand curve increases demand elasticity; the extent that management has advance information about economic conditions, it may be able to adjust ticket prices as the economy moves through the (local) business cycle;...
3p
flynn_beret
03-04-2022
20
3
Download
-
Bài giảng Đánh giá trương lực mạch máu trong sốc trình bày các nội dung chính sau: Mục tiêu điều trị trong sốc nhiễm khuẩn; Đánh giá trương lực mạch máu bằng elastance; Các yếu tố tim và mạch máu chi phối Edyn;... Mời các bạn cùng tham khảo để nắm nội dung chi tiết.
20p
viinkigayo2711
29-10-2021
23
2
Download
-
Equivalent inclusion approach is then developed to account for possible diversions, such as non-idealistic geometric forms of the inhomogeneities, imperfect matrix-inclusion contacts, filler dispersions, and when the particular values of the fillers’ properties are unspecified, using available numerical or experimental reference conductivity data for particular composites.
28p
capheviahe27
23-02-2021
28
4
Download
-
Homogenization of materials is a long-term research field of supervisor Pham Duc Chinh and Material Mechanics team with many published results. Therefore, author has selected the topic "Estimates and simulation for the elastic moduli of random polycrystals " as the research thesis.
27p
capheviahe26
25-01-2021
13
4
Download
-
Building approximation formulas using equivalentinclusion method to determine the effective values of the conductivity, the elastic modulus of compound-inclusion composite materials and applying numerical methods using finite elements (FE) calculated for some specific material models.
27p
capheviahe26
25-01-2021
21
4
Download
-
The aims of this study are to develop and apply the method of using frequency response functions to diagnose cracks in elastic bar and beams structure. The contents of the study includes: building models of cracked elastic bar and 3 beams structure; studying the changes of oscillation parameters, mainly frequency response functions due to cracks.
27p
larachdumlanat129
20-01-2021
24
6
Download
-
For this, the present work aims to familiarize the mechanical behavior of different materials, in our study we performed a comparison between the different specific energies elastic phase of the elements of study.
6p
lucastanguyen
01-06-2020
9
2
Download
CHỦ ĐỀ BẠN MUỐN TÌM
