Power Designer

The study advocates for the seamless integration of BIM, creating digital modeling that encompasses various input data, from geometry to costs. This integrated approach enhances real-time collaboration, mitigates errors during design, and streamlines construction processes by aiding scheduling, resource allocation, and progress monitoring.

6p viyoko 01-10-2024 2 1   Download

The purpose of the thesis is described as follows: To develop an independent simulation model for IEEE 803.2az Energy Efficient Ethernet Standards with Active and Idle modes of operations; To design and simulate a traffic source generator with exponentially distributed inter-arrival periods, and forecast the duration of the next idle periods, based in the distribution of packet arrivals; To extend the simulation of Dynamic power management in Access networks with the inclusion of prioritized traffic, which changes the duration of low power modes;…

141p runthenight07 01-03-2023 8 3   Download

This thesis presents the following contributions. First, it is identified that disturbance estimation based networks utilised for compensation possess the same polynomial architectures as signal conditioning anti-windup and their equivalents. Next, an appropriate strategy is identified to integrate disturbance compensation for finite-controlset optimisation schemes via the constraint set rather than the cost function to maintain a simple and elegant problem structure.

208p runordie3 06-07-2022 10 2   Download

The noncondensable gases in most geothermal resources include CO2 and smaller amounts of other gases. Currently, the worldwide geothermal power is a small sector within the energy industry, and CO2 emissions related to the utilisation of geothermal resources are consequently small. In some countries, however, such as Turkey and Iceland, geothermal energy production contributes significantly to their energy budget, and their CO2 emissions are relatively significant.

15p tanmocphong 29-01-2022 12 1   Download

The objectives of the thesis are to study on a method to analyze a large-scale system into a number of relatively independent subsystems (interconnected subsystems). Then, the dissertation will focus on designing a decentralized control method for the large-scale system which has been decomposed into the interconnected subsystems.

28p capheviahe27 23-02-2021 40 4   Download

Complex industrial systems often contain various uncertainties. Hence sophisticated fuzzy optimization (metaheuristics) techniques have become commonplace; and are currently indispensable for e ective design, maintenance and operations of such systems. Unfortunately, such state-of-the-art techniques suffer several drawbacks when applied to largescale problems.

18p nguathienthan9 08-12-2020 20 1   Download

The objective of the thesis is to design a solar power system with optimal power in order to enhance the opening efficiency of this system.

35p gaocaolon6 30-07-2020 14 1   Download

The main objective of this review is to show the reader the importance of the proper choice of an aero profile and its influence for the calculation during the design of rotor blades and the performance of hydrokinetic turbines.

12p lucastanguyen 01-06-2020 14 1   Download

Induction machines are widely used in many industries due to their robustness, ruggedness and easy maintenance feature. Due to the addition of power electronics devices and the complexity involved in the design of induction machines, their study and analysis can be very difficult.

13p lucastanguyen 01-06-2020 18 2   Download

In this paper, a Simulink modeling of Active Power Filter was established to reduce the harmonic with high adaptability for kinds of loads. Fuzzy logic controller was used to control the capacitor’s DC voltage of the two level three phases inverter that was designed to work as an Active Filter.

13p lucastanguyen 01-06-2020 44 6   Download

Having highlighted areas of possible applications of human powered machines, the aim of this work is to design a manually operated blender which has an efficient operation.

7p lucastanguyen 01-06-2020 9 1   Download

Field experiment was conducted on a sandy loam soil during winter irrigated season of 2015-16 at Department of Farm Management, Tamil Nadu Agricultural University, Coimbatore to study the effect of various organic manures and weed control methods on yield attributes and soil enzyme activities of organic cotton cultivation. The experiment was laid out in strip plot design and replicated thrice. Treatments viz.

9p chauchaungayxua6 26-06-2020 19 3   Download

The physical and proximate analysis of the fuel used during cooking was determined. The properties viz., moisture content fixed carbon, volatile matter, ash content was determined and the physical properties like bulk densities, resistance to water penetration and the shatter resistance of agro residue briquettes were determined to know the suitability of fuel for cook stove.

18p nguaconbaynhay6 24-06-2020 18 1   Download

This paper intends to manufacture a methodically system for design RM, which comprises of three measurements, including the work force measurement, technique measurement and time measurement, explicitly supervisory faculty, the executives strategies and the development procedure, consistently.

32p christabelhuynh 04-06-2020 22 4   Download

This presents the advantage of decoupling the management of the minor actinides from the conventional fuel and not impacting the core reactivity coefficients. In both cases, the design and analyses of potential transmutation systems have been carried out in the frame of Gen IV fast reactor using a “perturbation” approach in which nominal power reactor parameters are modified to accommodate the loading of minor actinides.

8p christabelhuynh 31-05-2020 24 1   Download

This study has been made in an attempt to find the structural integrity of the Chashma Nuclear power plant-1 FA skeleton at room temperature. The finite element (FE) analysis has been performed using ANSYS, in orderto determinethe elongationofthe FAskeleton as wellas the locationofmax. stress and stresses developedin axial direction under tensile load of 9800 N or 2 g being the FA handling or lifting load [Y. Zhang et al., Fuel Assembly Design Report, SNERDI, China, 1994].

6p christabelhuynh 30-05-2020 26 2   Download

In this paper, modelling and simulation of a control-oriented plant-dynamics tool for the molten salt fast reactor (MSFR) is presented. The objective was to develop a simulation tool aimed at investigating the plant response to standard control transients, in order to support the system design finalization and the definition of control strategies.

24p christabelhuynh 29-05-2020 30 1   Download

The system use solar power system, Electronic box with LCD display and rotary button to choose easily the menu and function, sensor calibration, frequency measurement as well as data transmission modes (GSM / radio waves) .

19p tocectocec 19-05-2020 6 1   Download

Correct application of the classical factorial F-test depends on normality and homogeneity of variance assumptions. If these assumptions are violated the type I error rate will be inflated and power of the test will be decreased. Therefore nonparametric statistical tests have been proposed to analyze the interaction effects in factorial designs.

8p tohitohi 22-05-2020 21 2   Download

In this research, we lay out a model to estimate the effect of rainfall by simulating the actual physical processes of the rain drops forming on the surface of the blades of a vertical-axis wind turbine (VAWT), thereby determining optimal wetness, then power and performance respectively. This could have an effect on the control strategy necessary for designing and controlling wind turbine.

11p abcxyz123_02 03-03-2020 31 1   Download